Mechano-chemical Polishing Characteristics of GGG Single Crystal Using Acid Solution

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

KDP Aqueous Solution-in-Oil Microemulsion for Ultra-Precision Chemical-Mechanical Polishing of KDP Crystal

A novel functional KH₂PO₄ (KDP) aqueous solution-in-oil (KDP aq/O) microemulsion system for KDP crystal ultra-precision chemical-mechanical polishing (CMP) was prepared. The system, which consisted of decanol, Triton X-100, and KH₂PO₄ aqueous solution, was available at room temperature. The functional KDP aq/O microemulsion system was systematically studied and applied as polishing solution to ...

متن کامل

Silica based polishing of {100} and {111} single crystal diamond

Diamond is one of the hardest and most difficult to polish materials. In this paper, the polishing of {111} and {100} single crystal diamond surfaces by standard chemical mechanical polishing, as used in the silicon industry, is demonstrated. A Logitech Tribo Chemical Mechanical Polishing system with Logitech SF1 Syton and a polyurethane/polyester polishing pad was used. A reduction in roughnes...

متن کامل

Calcium Phosphate Bone Cement Preparation using Mechano- Chemical Process

ACP (amorphous calcium phosphate) and DCPD (dicalcium phosphate dihydrate, or Brushite) powders were high energy dry ball milled at a 1:1 ratio for 1, 2, 3, 4, 10, or 24 hours to produce a variety of powders for use as calcium phosphate cements (CPC). A 1:1 blend of powders not subjected to milling was used as baseline material (control). Physicochemical and mechanical characterization was perf...

متن کامل

Manufacture of Bi-cuprate thin films on MgO single crystal substrates by chemical solution deposition

Bi2Sr2CaCu2O8 thin films have been deposited on MgO single crystal substrates by spin-coating a solution based on 2-ethylhexanoate precursors dissolved in xylene. Pyrolysis takes place between 200°C and 450°C and is accompanied by the release of 2-ethylhexanoic acid, CO2 and H2O vapour. Highly c-axis oriented Bi2Sr2CaCu2O8 as well as Eror Ho-doped Bi2Sr2(Ca,Ln)Cu2O8 (Ln = Er, Ho) films were obt...

متن کامل

Enhanced characteristics of fused silica fibers using laser polishing

The search for gravitational wave signals from astrophysical sources has led to the current work to upgrade the two largest of the long-baseline laser interferometers, the LIGO detectors. The first fused silica mirror suspensions for the Advanced LIGO gravitational wave detectors have been installed at the LIGO Hanford and Livingston sites. These quadruple pendulums use synthetic fused silica f...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of the Japan Society of Precision Engineering

سال: 1978

ISSN: 0374-3543

DOI: 10.2493/jjspe1933.44.333