Mechanism of Chip Formation in Machining Plastics
نویسندگان
چکیده
منابع مشابه
Experimental research of chip formation mechanism during high speed machining of hardened steel
The development of chip morphology, critical cutting conditions of serrated chip formation and cutting forces were observed and measured by high speed machining experiment for 30CrNi3MoV hardened steel. Results show that the cutting speed and rake angle are leading factors to influence chip morphology and cutting forces. With the increase of cutting speed, the continuous band chip transforms in...
متن کاملTrack Formation in Plastics
It is proposed that the “threshold for etchable track formation” in plastics is associated with the linear density of activated polymeric clusters along the path of an ion, in the “grain-count regime.” Existing data for CR-39 reveal a change in etching rate in the neighborhood of z/β having the value of about 15-20. We infer that this defines the transition from the grain count regime to the tr...
متن کاملsuppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولCharacteristics of cutting forces and chip formation in machining of titanium alloys
Chip formation during dry turning of Ti6Al4V alloy has been examined in association with dynamic cutting force measurements under different cutting speeds, feed rates and depths of cut. Both continuous and segmented chip formation processes were observed in one cut under conditions of low cutting speed and large feed rate. The slipping angle in the segmented chip was 551, which was higher than ...
متن کاملA Finite Element Study of Chip Formation Process in Orthogonal Machining
This paper deals with the plane strain 2D Finite Element (FE) modeling of segmented, as well as continuous chip formation while machining AISI 4340 with a negative rake carbide tool. The main objective is to simulate both the continuous and segmented chips from the same FE model based on FE code ABAQUS/Explicit. Both the adiabatic and coupled temperature displacement analysis have been performe...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Japan Society of Mechanical Engineers
سال: 1964
ISSN: 0029-0270,2185-9485
DOI: 10.1299/kikai1938.30.1467