Mechanism of Boiling Crisis and Transition Boiling in Pool Boiling

Boiling crisis and non-equilibrium drying transition

– Boiling crisis is the rapid formation of the quasi-continuous vapor film between the heater and the liquid when the heat supply exceeds a critical value. We propose a mechanism for the boiling crisis that is based on the spreading of the dry spot under a vapor bubble. The spreading is initiated by the vapor recoil force, a force coming from the liquid evaporation into the bubble. Since the ev...

Secondary pool boiling effects

Transient pool boiling in microgravityt

Transient nucleate pool boiling experiments using R113 are conducted for short times in microgravity and in earth gravity with different heater surface orientations and subcoolings. The heating surface is a transparent gold film sputtered on a quartz substrate, which simultaneously provides surface temperature measurements and permits viewing of the boiling process from beneath. For the microgr...

Pool Boiling Heat Transfer in Water/Amines Solutions

In this investigation, nucleate boiling heat transfer coefficients were experimentally measured during pool boiling of mixtures, consisting of water/monoethanolamine and water/diethanolamine on a horizontal heating rod, under atmospheric pressure. The experiment was carried out below 205 kW.m-2 heat flux, over a wide range of concentrations. These experiments include, measurement of pool boilin...

Mechanism of Crystallization Fouling during Pool Boiling of Finned Tubes

The formation of deposits on heat transfer surfaces is the main hurdle in optimum operation of thermal desalination units. It is, therefore, common practice to operate these units i.e. MSF under sub-atmospheric pressure to boil saline water below saturation temperature of which depositions occurs. However this comes with high price-tag for excessive use of energy for pumping. Alternative and en...