Mechanism by which Porous Structure is Formed on the Surface of Gold Alloy Containing Only Cu as Base Metal
نویسندگان
چکیده
منابع مشابه
Mechanism by which porous structure is formed on the surface of gold alloy containing only Cu as base metal.
Gold alloys with Cu contents of 10 mass%, 20%, and 30% were used for morphological observation of porous surface structures after heating at 800 degrees C in air followed by pickling with acid solution. With increasing Cu content in the gold alloy, the internal oxidation zone became well-developed in the alloy matrix. The mechanism by which a porous structure was formed on the surface of a gold...
متن کاملthe structure of lie derivations on c*-algebras
نشان می دهیم که هر اشتقاق لی روی یک c^*-جبر به شکل استاندارد است، یعنی می تواند به طور یکتا به مجموع یک اشتقاق لی و یک اثر مرکز مقدار تجزیه شود. کلمات کلیدی: اشتقاق، اشتقاق لی، c^*-جبر.
15 صفحه اولthe effects of changing roughness on the flow structure in the bends
flow in natural river bends is a complex and turbulent phenomenon which affects the scour and sedimentations and causes an irregular bed topography on the bed. for the reason, the flow hydralics and the parameters which affect the flow to be studied and understand. in this study the effect of bed and wall roughness using the software fluent discussed in a sharp 90-degree flume bend with 40.3cm ...
effect of ultrasonic cleanser on base metal alloy to enamel bond strength after surface treatment by acid and sandblast
0
متن کاملMicrostructures of the Activated Si-Containing AB2 Metal Hydride Alloy Surface by Transmission Electron Microscope
The surface microstructure of an activated Si-containing AB2 metal hydride (MH) alloy was investigated by transmission electron microscopy (TEM) and X-ray energy dispersive spectroscopy (EDS). Regions of the main AB2 and the secondary TiNi (B2 structure) phases directly underneath the surface Zr oxide/hydroxide layers are considered electrochemically inactive. The surface of AB2 is covered, on ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Dental Materials Journal
سال: 2005
ISSN: 1881-1361,0287-4547
DOI: 10.4012/dmj.24.503