Mechanics and dynamics of orbital drilling operations
نویسندگان
چکیده
منابع مشابه
6. Routine Exploratory Drilling and Support Operations
Weight on the bit is accomplished by running in the hole, between the bit and the drill pipe, several lengths of extremely heavy thick-walled pipe, called “drill collars”. Drill pipe may weigh up to 30 kg/m. Drill collars, of larger diameter than drill pipe and of constant diameter throughout, can weigh up to IS0 kg/m. The full hanging weight of the whole assembly in the blocks in the derrick (...
متن کاملSupervisory control for underbalanced drilling operations
Good flow and pressure control is essential for successful Underbalanced Drilling (UBD) operations. This work evaluates the use of Model Predictive Control (MPC) for integrated control of well conditions and the topside separation system during UBD. The downhole well pressure, separator liquid levels, and the separator pressure are controlled by manipulation of the rig pump, the choke, and the ...
متن کاملthe study of bright and surface discrete cavity solitons dynamics in saturable nonlinear media
امروزه سالیتون ها بعنوان امواج جایگزیده ای که تحت شرایط خاص بدون تغییر شکل در محیط منتشر می-شوند، زمینه مطالعات گسترده ای در حوزه اپتیک غیرخطی هستند. در این راستا توجه به پدیده پراش گسسته، که بعنوان عامل پهن شدگی باریکه نوری در آرایه ای از موجبرهای جفت شده، ظاهر می گردد، ضروری است، زیرا سالیتون های گسسته از خنثی شدن پراش گسسته در این سیستم ها بوسیله عوامل غیرخطی بوجود می آیند. گسستگی سیستم عامل...
Gauge freedom in orbital mechanics.
Both orbital and attitude dynamics employ the method of variation of parameters. In a non-perturbed setting, the coordinates (or the Euler angles) are expressed as functions of the time and six adjustable constants called elements. Under disturbance, each such expression becomes ansatz, the "constants" being endowed with time dependence. The perturbed velocity (linear or angular) consists of a ...
متن کاملDevelopment of a Methodology for Processing of Drilling Operations
Drilling is the most common machining operation and it forms the highest machining cost in many manufacturing activities including automotive engine production. The outcome of this operation depends upon many factors including utilization of proper cutting tool geometry, cutting tool material and the type of coating used to improve hardness and resistance to wear, and also cutting parameters. W...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Machine Tools and Manufacture
سال: 2018
ISSN: 0890-6955
DOI: 10.1016/j.ijmachtools.2018.03.001