Mechanically tunable optofluidic distributed feedback dye laser
نویسندگان
چکیده
منابع مشابه
Single mode optofluidic distributed feedback dye laser.
Single frequency lasing from organic dye solutions on a monolithic poly(dimethylsiloxane) (PDMS) elastomer chip is demonstrated. The laser cavity consists of a single mode liquid core/PDMS cladding channel waveguide and a phase shifted 15th order distributed feedback (DFB) structure. A 1mM solution of Rhodamine 6G in a methanol and ethylene glycol mixture was used as the gain medium. Using 6 na...
متن کاملOn-chip tunable optofluidic dye laser
We demonstrate a chip-scale tunable optofluidic dye laser with Au-coated fibers as microcavity. The chip is fabricated by soft lithography. When the active region is pumped, a relatively low threshold of 6.7 μJ∕mm2 is realized with multimode emission due to good confinement of the cavity mirrors, long active region, as well as total reflectivity. It is easy to tune the lasing emission wavelengt...
متن کاملLow-order distributed feedback optofluidic dye laser with reduced threshold
We report the demonstration of low order distributed feedback DFB optofluidic dye lasers with reduced threshold. The laser chips were realized in polydimethylsiloxane using replica molding with two masters. A comparison between first, second, and third order DFB dye lasers was performed, while the second order DFB dye laser exhibited the lowest pump threshold of 78 nJ/pulse. Compared to previou...
متن کاملOptofluidic evanescent dye laser based on a distributed feedback circular grating
We demonstrate an optofluidic evanescent laser based on a solid circular distributed feedback grating with the dye solution acting as the cladding layer. The laser mode is confined within the grating and experiences optical gain via the interaction between its evanescent component with the dye solution. Above a pump energy of 9.5 J /pulse, the laser exhibited single mode operation at 571 nm. St...
متن کاملBessel-beam-pumped tunable distributed-feedback laser.
A distributed-feedback (DFB) dye laser that is pumped by a standing Bessel-beam wave is constructed. Because of the long line focus of the Bessel beam, the laser medium is pumped in only a very thin filament (a few micrometers) along the optical axis. At the same time, longitudinal-mode selection is achieved because of the DFB effect. It is demonstrated that when the effective wavelength of the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Optics Express
سال: 2006
ISSN: 1094-4087
DOI: 10.1364/oe.14.010494