Mechanically alloyed Ti-Mo solid solution and its microstructure.

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Sintering Properties of Mechanically Alloyed Ti-5Al-2.5Fe

In this study, Ti-5Al-2.5Fe alloy was prepared by powder metallurgy. The elemental titanium, aluminum, and iron powders were mechanically alloyed for 10 h in a vacuum atmosphere. A stainless steel jar and stainless steel balls were used for mechanical alloying. The alloyed powders were then sintered by vacuum hot pressing at 950 °C for a soaking time of 30 minutes. Pure titanium was also sinter...

متن کامل

Formation and Corrosion Behavior of Mechanically-Alloyed Cu–Zr–Ti Bulk Metallic Glasses

Cu60Zr30Ti10 metallic glass powder was prepared by mechanically alloying a mixture of pure Cu, Zr, and Ti powders after 5 h of milling. Cu60Zr30Ti10 bulk metallic glass (BMG) was synthesized by vacuum hot pressing the as-milled Cu60Zr30Ti10 metallic glass powder at 746 K in the pressure range of 0.72–1.20 GPa, and the structure was analyzed through X-ray diffraction and transmission electron mi...

متن کامل

XANES of Mechanically Alloyed Y-Fe System

We have measured X-ray absorption near edge structure (XANFS) of mechanically alloyed YzFe and YFez system as a fundion of milling time. An amorphous phase is obtained by mechanical alloying for 100 hours in the YzFe system and for 500 hours in the YFez system. In both systems the intensity of Fe Is-4pn transition grows up significantly with increasing the milling time and approaches to that of...

متن کامل

Interface microstructure of alumina mechanically metallized with Ti brazed to Fe–Ni–Co using different fillers

R.M. Nascimento a,∗, A.E. Martinelli a, A.J.A. Buschinelli b, E. Sigismund c,1 a Universidade Federal do Rio Grande do Norte, Departamento de Engenharia de Materiais, CP. 1524, Campus Lagoa Nova, Natal, RN 59072-970, Brazil b Universidade Federal de Santa Catarina, Departamento de Engenharia Mecânica, Laboratório de Soldagem, Labsolda, CP. 476 Campus Trindade, Florianópolis, SC, Brazil c Forsch...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy

سال: 1990

ISSN: 0532-8799,1880-9014

DOI: 10.2497/jjspm.37.636