Mechanical, thermal and morphological characterization of PP/PS/HDPE ternary immiscible polymer blend for light weight automotive applications

Fabrication and Characterization of Polymer Blend Doped With Metal Carbide Nanoparticles for Humidity Sensors

Nanocomposites films of (polymer blend-ceramics) were prepared from (PVA-PAA) blend and (PVA-PAA) blend doped with niobium carbide nanoparticles for humidity sensors have low cost, easy fabrication, high sensitivity, lightweight and high corrosion resistance. The structural, electrical and optical properties of (PVA-PAA-NbC) nanocomposites have been studied. The D.C electrical properties of (PV...

TherMal siMulaTion and characTerizaTion opTiMizes leds for auToMoTive applicaTions

Thermal patterning of a critical polymer blend.

Utilizing the Soret effect, we have employed a moderately focused laser beam (30 microm, 20 mW) to write spatial composition patterns into layers of the critical polymer blend poly(dimethyl siloxane)/poly(ethyl-methyl siloxane) (PDMS/PEMS, M(w)=16.4/22.8 kg/mol) both in the one- and in the two-phase region a few degrees above and below the critical temperature T(c)=37.7 degrees C. Because of th...

A Comparative Study on the Mechanical, Thermal and Morphological Characterization of Poly(lactic acid)/Epoxidized Palm Oil Blend

In this work, poly(lactic acid) (PLA) a fully biodegradable thermoplastic polymer matrix was melt blended with three different epoxidized palm oil (EPO). The aim of this research was to enhance the flexibility, mechanical and thermal properties of PLA. The blends were prepared at various EPO contents of 1, 2, 3, 4 and 5 wt% and characterized. The SEM analysis evidenced successful modification o...

Mechanical, thermal and morphological properties of poly(lactic acid)/epoxidized palm olein blend.

Poly(lactic acid) (PLA) is known to be a useful material in substituting the conventional petroleum-based polymer used in packaging, due to its biodegradability and high mechanical strength. Despite the excellent properties of PLA, low flexibility has limited the application of this material. Thus, epoxidized palm olein (EPO) was incorporated into PLA at different loadings (1, 2, 3, 4 and 5 wt%...