Mechanical rolling formation of interpenetrated lithium metal/lithium tin alloy foil for ultrahigh-rate battery anode

Lithium Ion Battery Anode Aging Mechanisms

Degradation mechanisms such as lithium plating, growth of the passivated surface film layer on the electrodes and loss of both recyclable lithium ions and electrode material adversely affect the longevity of the lithium ion battery. The anode electrode is very vulnerable to these degradation mechanisms. In this paper, the most common aging mechanisms occurring at the anode during the operation ...

Silicon Based Composite Anode for Lithium Ion Battery

Building Self-Healing Alloy Architecture for Stable Sodium-Ion Battery Anodes: A Case Study of Tin Anode Materials.

The rational design of anode materials is a challenge in developing sodium ion batteries. Alloy anodes provide high gravimetric and volumetric capacities but suffer the short cycle life as a result of the continuous and accumulated pulverization, resulting from a large volume change during the cycling process. Herein, using pure Sn, an irreversible conversion reaction combined with an alloy rea...

Cycling of a Lithium-Ion Battery with a Silicon Anode Drives Large Mechanical Actuation.

Lithium-ion batteries with a Si anode can drive large mechanical actuation by utilizing the dramatic volume changes of the electrode during the charge/discharge cycles. A large loading of more than 10 MPa can be actuated by a LiFePO4 ||Si full battery with a rapid response while the driving voltage is lower than 4 V.

Bismuth Oxide: A New Lithium-Ion Battery Anode.

Bismuth oxide directly grown on nickel foam (p-Bi2O3/Ni) was prepared by a facile polymer-assisted solution approach and was used directly as a lithium-ion battery anode for the first time. The Bi2O3 particles were covered with thin carbon layers, forming network-like sheets on the surface of the Ni foam. The binder-free p-Bi2O3/Ni shows superior electrochemical properties with a capacity of 66...