Mechanical response of kerogen at high strain rates
نویسندگان
چکیده
• A new kerogen aggregate with Gaussian molecular weight distribution was established. The dynamic response of obtained under different strain rates. microscopic mechanism the plastic stress oscillation and fracture clarified. compressible hyper-viscoelastic constitutive model built to describe mechanical behaviour aggregate. As main organic component shale, has a direct impact on shale reservoirs. is used study kerogen, which rational conforming distribution. rates by using dynamics simulations. results show that shows material hardening decrease rate. In range, we analyse causes at level, obtain relationship between hydrogen bond. established, describes Our research provides valuable insight in properties, helps understand reservoirs from micro-perspective.
منابع مشابه
Influence of High Strain Rates on the Mechanical Behavior of High-Manganese Steels
In this work, dynamic mechanical properties of three high-manganese steels with TRIP/TWIP or fully TWIP characteristics are studied. High strain rate experiments in the range of true strain rates between ~500 and 1800 /s are conducted using a dynamic torsional testing setup. All the three steels show a positive strain rate sensitivity in the intermediate range of strain rates (up to 500 /s). Bu...
متن کاملThe mechanical response of pure iron at high strain rates under dominant shear
The mechanical behavior and microstructure of pure iron subjected to dominant shear loading has been characterized over a wide range of train rates. Pure iron is found to be highly strain-rate sensitive. Iron exhibits marked strain softening at ε̇ ≈ 8000 s−1 − σ ≈ 850 MPa that is nexpected for the annealed material, as characterized by TEM, but is identical to that of iron preshocked at 40 GPa [...
متن کاملPREDICTION OF HOT DEFORMATION BEHAVIOUR OF A PH STAINLESS STEEL AT HIGH STRAIN RATES
In this study the hot deformation behaviour of a precipitation hardened (PH) stainless steel at high strain rates has been predicted through hot compression testing. Stress-strain curves were obtained for a range of strain rates from 10-3 to 10+1 S-1 and temperatures from 850 to 1150°C. Results obtained by microstructure and stress-strain curves show that at low temperatures and high strain rat...
متن کاملDynamic mechanical response and a constitutive model of Fe-based high temperature alloy at high temperatures and strain rates
The effects of strain rate and temperature on the dynamic behavior of Fe-based high temperature alloy was studied. The strain rates were 0.001-12,000 s(-1), at temperatures ranging from room temperature to 800 °C. A phenomenological constitutive model (Power-Law constitutive model) was proposed considering adiabatic temperature rise and accurate material thermal physical properties. During whic...
متن کاملExperimental methods at high rates of strain
The subject area covered by this review is a large and important one and to do it full justice would require a larger format than is available here. However, an attempt is made to outline the history of some of the more important developments and to include most major techniques. Taylor impact, Hopkinson bar testing in its various forms and 1-D plate impact are all considered in some detail. Hi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Impact Engineering
سال: 2021
ISSN: ['0734-743X', '1879-3509']
DOI: https://doi.org/10.1016/j.ijimpeng.2021.103905