Mechanical Response and Damage of Woven Composite Materials Reinforced with Fique
نویسندگان
چکیده
منابع مشابه
MECHANICAL PROPERTIES OF DENTAL COMPOSITE MATERIALS REINFORCED WITH MICRO AND NANO-SIZE Al2O3 FILLER PARTICLES
Abstract: Composite specimens were prepared by dispersion of various amounts of nano-sized Al2O3 fillers in a monomer system containing 60% Bis-GMA and 40% TEGDMA. For comparative purposes, composite samples containing micrometer size Al2O3 fillers were also prepared following the same procedure. The mechanical properties of the light- cured samples were assessed by three-point flexural strengt...
متن کاملFatigue Damage Modelling of Fibre-reinforced Composite Materials: Review
This paper presents a review of the major fatigue models and life time prediction methodologies for fibrereinforced polymer composites, subjected to fatigue loadings. In this review, the fatigue models have been classified in three major categories: fatigue life models, which do not take into account the actual degradation mechanisms but use S-N curves or Goodman-type diagrams and introduce som...
متن کاملImpact Damage in Woven Fabric Reinforced Composites
INTRODUCTION Very often, woven fabrics are used as the reinforcement in advanced composite materials. Although the resulting inplane stiffness is lower than of their unidirectional counterparts, the excellent drapability of these materials eases the production of more general doubly curved components. In addition, the inherently low out-of-plane strength of these layered materials improves due ...
متن کاملModeling of Hygrothermal Damage of Composite Materials
Composite materials have been used extensively in various applications, such as mechanical engineering, aerospace engineering, and aviation thanks to their interesting mechanical properties. However, a substantial drawback in the use of such composite materials is that they absorb a significant amount of moisture when exposed to severe hygrothermal conditions. This factor dramatically affects t...
متن کاملMECHANICAL PROPERTIES OF DENTAL COMPOSITE MATERIALS REINFORCED WITH MICRO AND NANO-SIZE Al2O3 FILLER PARTICLES
Composite specimens were prepared by dispersion of various amounts of nano-sized Al2O3 fillers in a monomer system containing 60% Bis-GMA and 40% TEGDMA. For comparative purposes, composite samples containing micrometer size Al2O3 fillers were also prepared following the same procedure. The mechanical properties of the lightcured samples were assessed by three-point flexural strength, diametral...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Key Engineering Materials
سال: 2018
ISSN: 1662-9795
DOI: 10.4028/www.scientific.net/kem.774.143