Mechanical Property and Fracture Behavior of Al/Mg Composite Produced by Accumulative Roll Bonding Technique
نویسندگان
چکیده
منابع مشابه
Effect of the Particle Size on the Deformation and Fracture Behavior of Al/4vol.%Al2O3 Composite Produced by Accumulative Roll Bonding (ARB)
In this study, Al/Al2O3 composites with two different particle sizes of 1 µm and 0.3 µm were produced via accumulative roll bonding (ARB). The microstructure evolution, mechanical properties and fracture behavior of the composites were investigated. Results show that higher ARB cycles are required to achieve a uniform distribution of particles in the composite with 0.3 µm particle size. During ...
متن کاملinvestigation of mechanical and magnetic properties of cu/ni/fe3o4 multi-layer composite produced by accumulative roll bonding (arb)
techniques of severe plastic deformation have been successfully used for the production of novel metallic microstructures. among different types of these techniques, accumulative roll bonding (arb) has been extensively used to produce multi-layered composites. in the present study, a new manufacturing process for cu/ni- 1vol% fe3o4 composites was developed by using copper and nickel sheets toge...
متن کاملINVESTIGATING THE CORROSION BEHAVIOR OF NANO STRUCTURED COPPER STRIP PRODUCED BY ACCUMULATIVE ROLL BONDING (ARB) PROCESS IN ACIDIC CHLORIDE ENVIRONMENT
In this research accumulative roll bonding process as sever plastic deformation process was applied up to 8 cycles to produce the ultrafine grain copper. Microstructure of cycle 1, cycle 4 and cycle 8 investigated by TEM images. By analyzing TEM images the grain size measured below 100 nm in cycle 8 and it was with an average grain size of 200 nm. Corrosion resistance of rolled copper stri...
متن کاملeffect of the particle size on the deformation and fracture behavior of al/4vol.%al2o3 composite produced by accumulative roll bonding (arb)
in this study, al/al2o3 composites with two different particle sizes of 1 µm and 0.3 µm were produced via accumulative roll bonding (arb). the microstructure evolution, mechanical properties and fracture behavior of the composites were investigated. results show that higher arb cycles are required to achieve a uniform distribution of particles in the composite with 0.3 µm particle size. during ...
متن کاملINVESTIGATION OF TRIBOLOGICAL CHARACTERISTICS OF AL/NANO SiO2NANOCOMPOSITES PRODUCED BY ACCUMULATIVE ROLL BONDING (ARB) PROCESS
Accumulative roll-bonding process (ARB) is an important severe plastic deformation technique for production of the ultrafine grained, nanostructured and nanocomposite materials in the form of plates and sheets. In the present work, this process used for manufacturing Al/SiO 2 nanocomposites by using Aluminum 1050 alloy sheets and nano sized SiO 2 particles, at ambient temperature. After 8 cycle...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Composites
سال: 2013
ISSN: 2314-5978
DOI: 10.1155/2013/748273