Mechanical Properties Optimization and Modeling of Palm Kernel Shell Ash Reinforced Al-Mg-Si Composite using Grey Relational Analysis

نویسندگان

چکیده

There is relatively little information on the mechanical behavior and modeling of palm kernel shell ash reinforced Al-Mg-Si composite. Thus, this study investigates Hardness, impact strength modulus rupture (MOR) composite were investigated analyzed using Minitab 16 Origin software. It was found that properties are inconsistent with composition variation. The mathematical graphical have been presented. revealed aside composition, there other factors responsible for which not considered in experimental analysis. Validation claim also made interaction between two compositions resultant gave some specific better properties. However, strongly recommends conduction further analysis important response

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Optimization of the injection molding process of Derlin 500 composite using ANOVA and grey relational analysis

Warpage and shrinkage control are important factors in proving the quality of thin-wall parts in injection modeling process. In the present paper, grey relational analysis was used in order to optimize these two parameters in manufacturing plastic bush of articulated garden tractor. The material used in the plastic bush is Derlin 500. The input parameters in the process were selected according ...

متن کامل

Experimental Study of The Mechanical Properties of Banana Fiber and Groundnut Shell Ash Reinforced Epoxy Hybrid Composite

Effect of addition of filler material to the natural fiber composite was experimentally investigated. Composites are manufactured by the conventional hand-layup method. All composites are made with a fixed banana fiber with 15% weight fraction addition of different weight fraction of (0, 3, 5, 7.5%) groundnut shell ash is added to the composite. Tensile, hardness, impact and compressive strengt...

متن کامل

Modeling and Optimization of Mechanical Properties of PA6/NBR/Graphene Nanocomposite Using Central Composite Design

Thermoplastic elastomer of PA6/NBR reinforced by various nanoparticles have wide application in many industries. The properties of these materials depend on PA6, NBR, and nanoparticle amount and characteristics. In this study, the simultaneous effect of NBR and graphene nanoparticle content on mechanical, thermal properties, and morphology of PA6/NBR/Graphene nanocomposites investigated by Cent...

متن کامل

Wear behavior of Al-7%Si-0.3%Mg/melon shell ash particulate composites

The present study examined wear characteristics of A356/melon shell ash particulate composites. Dry-sliding the stainless steel ball against specimen disc revealed the abrasive wear behavior of the composites under loads of 2 and 5N. The composite showed lower wear rate of 2.182 × 10-4 mm3/Nm at 20 wt% reinforced material under load of 5N. Results showed that wear rate decreased significantly w...

متن کامل

Oil Palm Shell Ash - Cement Mortar Mixture and Modification of Mechanical Properties

The waste agriculture materials cause environment pollution, recycle of these materials help sustainable development. This study focused on the impact of used oil palm shell ash on the compressive and flexural strengths of cement mortar. Two different cement mortar mixes have been designed to investigate the impact of oil palm shell ash on strengths of cement mortar. Quantity of 4% oil palm she...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: International journal of grey systems

سال: 2022

ISSN: ['2767-3308', '2767-6412']

DOI: https://doi.org/10.52812/ijgs.44