Mechanical properties of sugar palm yarn/woven glass fiber reinforced unsaturated polyester composites: effect of fiber loadings and alkaline treatment
نویسندگان
چکیده
منابع مشابه
Mechanical properties of woven glass fiber-reinforced composites.
The aim of this investigation was to measure the flexural and compressive strengths and the corresponding moduli of cylindrical composite specimens reinforced with woven glass fiber. Test specimens were made by light-curing urethane dimethacrylate oligomer with woven glass fiber of 0.18-mm standard thickness. Tests were conducted using four reinforcement methods and two specimen diameters. Flex...
متن کاملCreep Behavior of Basalt and Glass Fiber Reinforced Epoxy Composites
The creep behavior of basalt fiber reinforced epoxy (BFRE) and glass fiber reinforced epoxy (GFRE) composites was studied through tensile testing at high temperature. To study the effect of reinforcing epoxy, the micro glass powder (MGP) was added at various volume percentage into the epoxy resin in BFRE composites. The initial strain for all the specimens were evaluated and compared with each ...
متن کاملEffect of Fiber Surface Treatment on Wear Characteristics of Carbon Fiber Reinforced Polyamide 6 Composites
Ozone modification method and air-oxidation were used for the surface treatment of polyacrylonitrile(PAN)-based carbon fiber. The surface characteristics of carbon fibers were characterized by X-ray photoelectron spectroscopy (XPS). The interfacial properties of carbon fiber reinforced polyamide 6 (CF/PA6) composites were investigated by means of the single fiber pull-out tests. As a result...
متن کاملComparative analysis of the mechanical and thermal properties of polyester hybrid composites reinforced by jute and glass fiber
This work describes the study to investigate and compare the mechanical and thermal properties of raw jute and glass fiber reinforced polyester hybrid composites. To improve the mechanical properties, jute fiber was hybridized with glass fiber. Polyester resin, jute and glass fibers were laminated in three weight ratios(77/23/0, 68/25/7 and 56/21/23) respectively to form composites. The tensile...
متن کاملEffect of fiber surface treatments on the fiber-matrix interaction in banana fiber reinforced polyester composites
Cellulosic bers have been used as cost-cutting llers in plastic industry. Among the various factors, the nal performance of the composite materials depends to a large extent on the adhesion between the polymer matrix and the reinforcement and therefore on the quality of the interface. To achieve optimum performance of the end product, suf cient interaction between the matrix resin and th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polimery
سال: 2019
ISSN: 0032-2725
DOI: 10.14314/polimery.2019.10.3