Mechanical Properties of Poly-methyl methacrylate (PMMA) for Nano Imprint Lithography
نویسندگان
چکیده
منابع مشابه
The Effect of TiO2 Nanoparticles on Mechanical Properties of Poly Methyl Methacrylate Nanocomposites (RESEARCH NOTE)
Various applications of nanocomposites were a good motivation to start a study on this wide spreading field of science. Current research is an investigation on incorporating different percentages of TiO2 nanoparticle as reinforcement to a base material which here is poly methyl methacrylate (PMMA). In this study various percentages of TiO2 (0.5, 1 and 2 wt%) were added to pure PMMA and effect o...
متن کاملElectrospinning of cyclodextrin functionalized poly(methyl methacrylate) (PMMA) nanofibers
Cyclodextrin functionalized PMMA nanofibers (PMMA/CD) were successfully produced by electrospinning technique with the goal to develop functional nanowebs. Bead-free uniform electrospun PMMA/CD nanofibers were obtained from a homogeneous solution of CDs and PMMA in dimethylformamide (DMF) using three different types of CDs, a-CD, b-CD and g-CD. The electrospinning conditions were optimized in o...
متن کاملDioxide ( TiO 2 ) using Poly ( methyl methacrylate ) ( PMMA )
The Minnesota Nano Center’s Keller Hall facility includes an atomic layer deposition (ALD) machine that is capable of depositing uniform alumina (Al2O3), hafnium oxide (HfO2), silicon dioxide (SiO2), zinc oxide (ZnO), and titanium dioxide (TiO2). ALD works by building alternate layers on a film using two different precursor gases – one usually supplying the metallic atoms and water vapor (H2O) ...
متن کاملFriction Stir Welding؛ Material Flow؛ Heat Generation؛ Thermal Simulation؛ Poly methyl methacrylate (PMMA)
In this study, the effects of linear and rotational speed of the friction stir welding tool was investigated on the heat generation and distribution at surface and inside of workpiece, material flow and geometry of the welding area of poly methyl methacrylate (PMMA) workpiece. The commercial CFD Fluent 6.4 software was used to simulation of the process with computational fluid dynamic technique...
متن کاملPreparation and Characterization of Poly (methyl Methacrylate) (pmma) and Poly (vinyl Chloride) (pvc) Alloys
Alloys of Poly (Methyl methacrylate) (PMMA) and Poly (vinyl Chloride) (PVC) were prepared by solvent casting techniques. Physiochemical characteristics of the products were studied. It was found that at certain relative concentration, some of these properties were enhanced, while in some, degraded relative to the constituent homopolymers. These results were interpreted in terms of the interacti...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Photopolymer Science and Technology
سال: 2003
ISSN: 0914-9244,1349-6336
DOI: 10.2494/photopolymer.16.615