Mechanical Properties of Ni-Zr and Ni-B Amorphous Alloys
نویسندگان
چکیده
منابع مشابه
Dendritic solidification and fragmentation in undercooled Ni–Zr alloys
Kinetics of dendritic solidification and fragmentation of dendritic crystals in undercooled Ni–Zr samples are studied. Using the capacitance roximity sensor technique and a high-speed-camera system, the dendrite growth velocity has been measured as a function of initial undercooling n solidifying droplets processed by the electromagnetic levitation technique. Analyses of solidified droplets giv...
متن کاملCHARACTERIZATION OF THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF LIQUID PHASE DIFFUSION BONDS USING EUTECTIC Ni-Hf AND Ni-Zr BRAZE ALLOYS AFTER SHORT PROCESSING TIMES (40 MINUTES)
As shown in the preceding chapter, simple binary eutectic Ni-Hf and Ni-Zr braze alloys can be used to successfully join In738 Ni-base superalloy. The joint gap must, however, be narrow (less than 0.15 mm in width) to allow capillary action to draw the filler metal into the joint. Such narrow joint gaps are usually only found in the manufacturing industry. In the repair industry, especially in I...
متن کاملSonochemical preparation of nanosized amorphous Fe-Ni alloys
Nanosized amorphous alloy powders of Fe20Ni80 , Fe40Ni60 , and Fe60Ni40 were prepared by sonochemical decomposition of solutions of volatile organic precursors, Fe~CO!5 and Ni~CO!4 in decalin, under an argon pressure of 100 to 150 kPa at 273 K. Magnetic susceptibility of Fe40Ni60 and Fe60Ni40 indicates blocking temperatures of 35 K and a magnetic particle size of about 6 nm. Thermogravimetric m...
متن کاملEffect of Ni on Amorphization of Ti-Cu-Ni Ternary alloys Prepared by Mechanical alloying
Amorphous alloys has been taken into consideration because of their unique properties and are nominated as the future engineering materials. In this research, the effect of Ni and milling time on amorphization process and thermal stability of Ti50Cu50-xNix(x=10, 15, 25 at%) alloy system were investigated. The evolution of amorphization during milling, thermal stability and subsequent heat treat...
متن کاملMicrostructural evolution of body-centered cubic structure related Ti–Zr–Ni phases in non-stoichiometric Zr-based Zr–Ti–Mn–V–Ni hydride electrode alloys
Non-stoichiometric Zr-based alloys were prepared, and the corresponding electrochemical properties were characterized as hydride electrode alloys. The microstructure and chemical composition of non-stoichiometric Zr–Ti–Mn–V–Ni hydride electrode alloys were systematically investigated by x-ray Rietveld refinement, transmission electron microscopy (TEM), and energy dispersive spectroscopy under T...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1989
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.53.1_1