Mechanical Properties of Electro-Discharge-Sintered Porous Titanium Implants
نویسندگان
چکیده
منابع مشابه
Mechanical properties of sintered meso-porous silicon: a numerical model
: Because of its optical and electrical properties, large surfaces, and compatibility with standard silicon processes, porous silicon is a very interesting material in photovoltaic and microelectromechanical systems technology. In some applications, porous silicon is annealed at high temperature and, consequently, the cylindrical pores that are generated by anodization or stain etching reorgani...
متن کاملCharacterization of loose powder sintered porous titanium and Ti6Al4V alloy
Porous titanium and Ti6Al4V alloy, biomedical candidate materials for use in orthopedic and dental implants, were manufactured by sintering the powders at various temperatures in loose condition. The characteristics of the corresponding powders and utilized sintering temperatures limited the final porosities in the range 30-37.5 vol. %. Similar to wrought alloys, compression stress-strain curve...
متن کاملTitanium Powder Sintering in a Graphite Furnace and Mechanical Properties of Sintered Parts
Recent accreditation of titanium powder products for commercial aircraft applications marks a milestone in titanium powder metallurgy. Currently, powder metallurgical titanium production primarily relies on vacuum sintering. This work reported on the feasibility of powder sintering in a non-vacuum furnace and the tensile properties of the as-sintered Ti. Specifically, we investigated atmospheri...
متن کاملCrystallographic Properties and Mechanical Behavior of Titanium Hydride Layers Grown on Titanium Implants
Commercially pure titanium for bone-anchored dental implants, submitted to a sand-blasting and acid-etching (SLA) surface treatment, has been mechanically tested and analyzed by SEM and TEM observations. A face-centered cubic titanium hydride layer grows on the polycrystalline titanium substrate with various epitaxial relationships, whose grains show also epitaxial relationships with each other...
متن کاملFabrication of porous titanium implants by three-dimensional printing and sintering at different temperatures.
This study evaluated the feasibility of using three-dimensional printing (3DP) to fabricate porous titanium implants. Titanium powder was blended with a water-soluble binder material. Green, porous, titanium implants fabricated by 3DP were sintered under protective argon atmosphere at 1,200, 1,300, or 1,400°C. Sintered implant prototypes had uniform shrinkage and no obvious shape distortion aft...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Korean Journal of Materials Research
سال: 2006
ISSN: 1225-0562
DOI: 10.3740/mrsk.2006.16.3.173