MECHANICAL PROPERTIES OF CONCRETE WITH RECYCLED COMPOSITE AND PLASTIC AGGREGATES

Mechanical and Physical Properties of Polyester Polymer Concrete Using Recycled Aggregates from Concrete Sleepers

Currently, reuse of solid waste from disused infrastructures is an important environmental issue to study. In this research, polymer concrete was developed by mixing orthophthalic unsaturated polyester resin, artificial microfillers (calcium carbonate), and waste aggregates (basalt and limestone) coming from the recycling process of concrete sleepers. The variation of the mechanical and physica...

Effects of Recycled Concrete Aggregates on Properties of Asphalt Concrete

Performance of High-strength Concrete Made with Recycled Ceramic Aggregates

Recent scientific concerns to achieve sustainability in construction have suggested the implementation of using recycled aggregate in concrete because it has the potential to reduce the demand for extraction of natural raw materials and decrease the volume of wastes landfilled. In this respect, this study aims to investigate the suitability of using ceramic tile (CT) and ceramic sanitary (CS) w...

Investigating properties of fresh and hardened self-compacting concrete made of recycled aggregates

Self-compacting concrete is a new high performance concrete with high ductility and segregation resistance. In recent years, construction material manufacturers have focused their attention on lightweight concrete and have strived to use lightweight concrete, if possible, in load-bearing parts of buildings. Concrete with both self-compacting and lightweight properties is favourable in this cont...

Low Cycle Fatigue Behavior of Concrete with Recycled Concrete Aggregates

A comparison of concrete containing recycled concrete coarse aggregates and natural coarse aggregates subjected to high strain, low cycle compressive fatigue is presented. Using a strain based feedback control loop, concrete cylinders are compressed at 15µε/s to a specified strain then unloaded to zero stress for 10 cycles. After cycling, all samples are loaded to a strain of 0.008. Direct conc...