Mechanical Properties of AW-5083 Alloy Joints Welded By Hybrid Method – FSW and MIG
نویسندگان
چکیده
منابع مشابه
Improving Mechanical Properties of PVPPA Welded Joints of 7075 Aluminum Alloy by PWHT
In this study, 7075 aluminum alloy with a thickness of 10 mm was successfully welded with no obvious defects by pulsed variable polarity plasma arc (PVPPA) welding. The mechanical properties of PVPPA welded joints have been researched by post weld heat treatment (PWHT). The results indicate that the heat treatment strongly affects the mechanical properties of the welded joints. The tensile stre...
متن کاملFatigue Strength Estimation Based on Local Mechanical Properties for Aluminum Alloy FSW Joints
Overall fatigue strengths and hardness distributions of the aluminum alloy similar and dissimilar friction stir welding (FSW) joints were determined. The local fatigue strengths as well as local tensile strengths were also obtained by using small round bar specimens extracted from specific locations, such as the stir zone, heat affected zone, and base metal. It was found from the results that f...
متن کاملThe Effect of the AA7075 Interlayer on the Microstructure and Mechanical Properties of the AA1050 Butt Joint Welded by FSW
In this research, the FSW Butt joint of commercial aluminum 1050 was investigated by using the 7075 aluminum alloy interlayer on the linear velocity of 30, 50 and 100 mm / min, and rotational speeds of 800 and 1200 rpm. A threaded cylindrical tool was used for joining of the 5 mm sheets. The OM, SEM, microhardness and tensile tests were done. The results shows that in sample with an interlayer ...
متن کاملThe Effect of the AA7075 Interlayer on the Microstructure and Mechanical Properties of the AA1050 Butt Joint Welded by FSW
In this research, the FSW Butt joint of commercial aluminum 1050 was investigated by using the 7075 aluminum alloy interlayer on the linear velocity of 30, 50 and 100 mm / min, and rotational speeds of 800 and 1200 rpm. A threaded cylindrical tool was used for joining of the 5 mm sheets. The OM, SEM, microhardness and tensile tests were done. The results shows that in sample with an interlayer ...
متن کاملEnhancement in Mechanical Properties of Vibratory Welded Joints: an Overview
This paper consolidated the improvements in mechanical properties from the past literature available using Vibratory welding technique. Vibratory welding is a promising method in eliminating the disadvantages experienced by the traditional welding like residual stress due to the electrical energy input which induces vibrations by varying the input parameters voltage, current, amplitude and freq...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of KONES
سال: 2019
ISSN: 2354-0133
DOI: 10.2478/kones-2019-0088