Mechanical Properties and Permeability of Sand Casting Moulds with Eggshells Binder
نویسندگان
چکیده
منابع مشابه
determination of some physical and mechanical properties red bean
چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...
15 صفحه اولImproving of Microstructure and Mechanical Properties of Al-A356 Alloy with Compo-Casting Method
Aluminum/alumina composites are used in automotive and aerospace industries due to their low density and good mechanical strength. In this research, the effect of mechanical stirring of slurry in liquid-solid phase temperature and injection of alumina powder with inert gas (Ar) on microstructure and mechanical properties of Al-A356 alloy is investigated. In order to improve of the wettability a...
متن کامل“ Microstructural and mechanical properties of eutectic Al – Si alloy with grain refined and modified using gravity - die and sand casting ”
This paper attempts to investigate the influence of the microstructure and mechanical property changes on sand casting and permanent die casting alloys by grain refinement, modification combined action of both (Al– 3Ti–1B + Al–10Sr) and without grain refinement and modification effect. The microstructures of the castings are studied by optical microscopes. The microstructure and mechanical prop...
متن کاملDesign & Analysis of Pure Iron Casting with Different Moulds
In the present work it has been shown that FEA software like ANSYS may play an important role in predicting cast defect before the actual casting. Transient thermal analysis and Couple-Field analysis in ANSYS can predict temperature distribution and thermal stress distribution in the casting after solidification very accurately. This fact has been proved by validating a transient thermal analys...
متن کاملOptimization of Microstructure and Mechanical Properties of Al-A360 Produced by Semi-Solid Casting
Semi-Solid Casting (SSM) is a new process that could produce globular structures with mechanical properties. The cooling slope method (CLM) is a one of this process that was employed to produce the A360 feedstock. In this method, The dendritic primary phase in the conventionally cast A356 alloy has transformed into a non-dendritic one. In this paper, The molten alloy with the temperature (PT) o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Mechanical Engineering Science and Technology
سال: 2018
ISSN: 2580-0817,2580-2402
DOI: 10.17977/um016v2i12018p007