Mechanical Properties and Microstructures of Al2O3/TiC/TiB2 Ceramic Tool Material
نویسندگان
چکیده
منابع مشابه
determination of some physical and mechanical properties red bean
چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...
15 صفحه اولEffects of HfB2 and HfN Additions on the Microstructures and Mechanical Properties of TiB2-Based Ceramic Tool Materials
The effects of HfB₂ and HfN additions on the microstructures and mechanical properties of TiB₂-based ceramic tool materials were investigated. The results showed that the HfB₂ additive not only can inhibit the TiB₂ grain growth but can also change the morphology of some TiB₂ grains from bigger polygons to smaller polygons or longer ovals that are advantageous for forming a relatively fine micro...
متن کاملInvestigation of microstructures and mechanical properties of dissimilar welds between Incoloy 825 and 316 stainless steel
In this study, microstructural features and mechanical properties of Incoloy 825-316L stainless steel dissimilar joints have been investigated. For this purpose, pulsed gas tungsten arc welding method was employed and 316L, Inconel 82 and Inconel 625 alloys were used as filler metal. First, specimens were cut. Pulsed gas tungsten arc welding was performed using peak and base currents of 220 A a...
متن کاملInvestigation of microstructures and mechanical properties of dissimilar welds between Incoloy 825 and 316 stainless steel
In this study, microstructural features and mechanical properties of Incoloy 825-316L stainless steel dissimilar joints have been investigated. For this purpose, pulsed gas tungsten arc welding method was employed and 316L, Inconel 82 and Inconel 625 alloys were used as filler metal. First, specimens were cut. Pulsed gas tungsten arc welding was performed using peak and base currents of 220 A a...
متن کاملMicrostructures and Mechanical Properties of TiCrZrNbNx Alloy Nitride Thin Films
The pure elements Ti, Zr, Cr, Nb were selected to produce an TiCrZrNb alloy target and deposited thin films thereof by a reactive high vacuum DC sputtering process. Nitrogen was used as the reactive gas to deposit the nitride thin films. The effect of nitriding on the properties of the TiCrZrNbNx film was tested by changing the nitrogen ratio of the atmosphere. All of the as-deposited TiCrZrNbN...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Crystals
سال: 2021
ISSN: 2073-4352
DOI: 10.3390/cryst11060637