Mechanical Properties and Fabrication of 4YSZ-BN Composites by Pulsed Current Activated Sintering
نویسندگان
چکیده
منابع مشابه
Simultaneous synthesis and consolidation of nanostructured MgAl2O4- Mg3Al4Ti3O25 composite by pulsed current activated sintering and its mechanical properties
Nanopowders of Al2O3, TiO2 and MgO were fabricated by high energy ball milling. The simutaneous synthesis and sintering of nanostuctured MgAl2O4-Mg3Al4Ti3O25 composite was investigated by the pulsed current activated sintering process. The advantage of this process is that it allows very quick densification to near theoretical density and inhibition of grain growth. A highly dense nanostructure...
متن کاملdetermination of some physical and mechanical properties red bean
چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...
15 صفحه اولCarbon-Dispersed WCFeAl Hard Material Fabricated by Mechanical Milling and Subsequent Pulsed Current Sintering
A new metal mold material for pulsed current sintering (PCS) methods at high temperatures with higher electrical resistivity than cemented carbide molds, was fabricated using mechanical milling and PCS. The constituent (100 1 x)(WC10 or 30FeAl) + xC (x = 08; mass%) hard material with dispersed spherical carbon particles were synthesized via mechanical milling of the source powders and PCS. Th...
متن کاملFabrication of Nanostructured Cu matrix Nanocomposites by High Energy Mechanical Milling and Spark Plasma Sintering
Spark plasma sintering (SPS) is a sintering process that is capable of sintering hard worked powders in short times. This technique was used to fabricate bulk Cu and Cu-SiC nanocomposites. Pure Cu and mixed powders of Cu including 4 vol% of SiC nanoparticles were mechanically alloyed for 25 h and sintered at 750˚C under vacuum condition by SPS method. Microstructures of the materials were chara...
متن کاملPulsed current activated synthesis and consolidation of a nanostructured Cr2Zr- ZrO2 composite and its mechanical properties
ZrO2 has been used for hip and knee joint replacements because of the excellent combination of biocompatibility, low density and corrosion resistance. However, coarse-grained ZrO2 has low wear, abrasion resistance and fracture toughness. One of the methods to improve mechanical properties is generally to refine the grain size. As nanomaterials possess high strength, high hardness, excellent duc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Korean Journal of Metals and Materials
سال: 2019
ISSN: 1738-8228,2288-8241
DOI: 10.3365/kjmm.2019.57.12.764