Mechanical Properties and Eco-Efficiency of Steel Fiber Reinforced Alkali-Activated Slag Concrete

Mechanical Properties and Eco-Efficiency of Steel Fiber Reinforced Alkali-Activated Slag Concrete

Conventional concrete production that uses ordinary Portland cement (OPC) as a binder seems unsustainable due to its high energy consumption, natural resource exhaustion and huge carbon dioxide (CO₂) emissions. To transform the conventional process of concrete production to a more sustainable process, the replacement of high energy-consumptive PC with new binders such as fly ash and alkali-acti...

PROPERTIES OF ALKALI-ACTIVATED FLY ASH CONCRETE BLENDED WITH SLAG

Mechanical Properties of Hybrid Fibre Reinforced Concrete With Steel And

The experimental study deals with Hybrid fibre reinforced concrete with the use of (Polypropylene and Recycled polyethylene terephthalate RPET). The M40 grade concrete used was designed by using IS10262-2009 code. The steel fibre and synthetic fibre were added at the volume fractions up to 0.5%. Test results showed that the fibres, when used in a hybrid form, could result in superior composite ...

Processing and Mechanical Properties of Macro Polyamide Fiber Reinforced Concrete

This study developed a macro-sized polyamide (PA) fiber for concrete reinforcement and investigated the influence of the PA fiber on flexural responses in accordance with ASTM standards. PA fibers are advantageous compared to steel fibers that are corrosive and gravitated. The macro-sized PA fiber significantly improved concrete ductility and toughness. Unlike steel fibers, the PA fibers produc...

Basic Mechanical Properties of Basalt Fiber Reinforced Recycled Aggregate Concrete

In order to study the basic mechanical properties of basalt fiber reinforced recycled aggregate concrete, the concrete mix ratio, the length and the volume mixing ratio of chopped basalt fiber yarn are designed for changing factors. A total of 324 specimens have been completed for this investigation. The compressive strength, splitting tensile strength, elastic modulus and axial compressive str...