Mechanical processing of complex profile aluminum products

Toxicological Profile for Aluminum

Toxicological Profile for Aluminum

Mechanical Behavior of Aluminum (AlSi10Mg)-RHA Composite

Rice Husk Ash (RHA) of three different particle size ranges (50 – 75 μm), (75 – 100μm) and (100 – 150μm) in 3, 6, 9 and 12 % by weight was reinforced with the aluminium alloy using stir cast route. The microstructure and mechanical properties of the fabricated composites were analyzed. The results reveal that the tensile strength, compressive strength and hardness of the aluminum alloy composit...

Predicting the Impact of Quenching on Mechanical Properties of Complex-Shaped Aluminum Alloy Parts

The mechanical properties of age-hardenable aluminum alloy extrusions are critically dependent on the rate at which the part is cooled (quenched) after the forming operation. The present study continues the development of an intelligent spray quenching system, which selects the optimal nozzle configuration based on part geometry and composition such that the magnitude and uniformity of hardness...

Mechanical evaluation of aluminum alloy ring fixator.

OBJECTIVE To test the homemade ring fixator as a tool for correction of bony deformity. MATERIAL AND METHOD The authors developed an aluminum alloy ring fixator and tested it to find out the accuracy of manufacturing and strength of the ring systems under axial load with the Roundness Testing Machine and Lloyd Universal Testing Machine. RESULTS The mean diameter of the twenty five-drill hol...