Mechanical performances of finger jointed cross laminated timber (CLT)

Bending Properties of Cross Laminated Timber (CLT) with a 45° Alternating Layer Configuration

Bending tests were conducted with cross laminated timber (CLT) panels made using an alternating layer arrangement. Boards of Norway spruce were used to manufacture five-layer panels on an industrial CLT production line. In total, 20 samples were tested, consisting of two CLT configurations with 10 samples of each type: transverse layers at 45° and the conventional 90° arrangement. Sample dimens...

Ambient vibration tests of a cross-laminated timber building

Assessing Cross Laminated Timber (CLT) as an Alternative Material for Mid-Rise Residential Buildings in Cold Regions in China—A Life-Cycle Assessment Approach

Timber building has gained more and more attention worldwide due to it being a generic renewable material and having low environmental impact. It is widely accepted that the use of timber may be able to reduce the embodied energy of a building. However, the development of timber buildings in China is not as rapid as in some other countries. This may be because of the limitations of building reg...

Structural Tests of Concrete Composite - Cross - Laminated Timber Floors Final Report

Experimental tests of a composite concrete-cross-laminated timber (CLT) floor system were conducted. The floor system was constructed with 5-ply CLT panels (6.75 in. thick) made composite with a 2.25 in. thick reinforced concrete topping slab. Four series of tests were performed using different specimen configurations and laboratory testing methods. Tests included: (1) Comparative one-way bendi...

Cross Laminated Timber Construction for Resisting Lateral Loads on Six Level Buildings

The author’s intention is to contribute to the general discussion on timber multi-level commercial buildings. Interest in this topic is expected due to the environmental advantages of timber construction when compared to concrete and steel. This paper looks into three timber based systems for resisting lateral loads for buildings to six storeys, that will ensure relatively ‘open’ floor spaces. ...