MECHANICAL PERFORMANCE OF LAP JOINTS OF FLAT ROOF WATERPROOFING MEMBRANES SUBJECTED TO ARTIFICIAL WEATHERING
نویسندگان
چکیده
منابع مشابه
Dynamic response of adhesively bonded single-lap joints with a void subjected to harmonic peeling loads
The only viable method to join some components is by using adhesives. These components are often subjected to dynamic loading, which may cause initiation and propagation of failure in the joint. In order to ensure the reliability of these structures, their dynamic response and its variation with the presence of defects in the bonded area must be understood. The dynamic response of a single-lap ...
متن کاملAnalytical Solution of Stress Field in Adhesively Bonded Composite Single-Lap Joints Under Mechanical Loadings
In this paper, considering an adhesively bonded composite single-lap joint, a novel approach is presented to predict the peel and shear stress distributions of the adhesive layer for an ASTM standard test sample. In current method, the equilibrium equations are derived using the energy method and based on the Timoshenko’s beam theory. Two solution procedures then are discussed, one of which rep...
متن کاملA Macroscopic Finite Element for a Symmetric Double Lap Joint Subjected to Mechanical and Thermal Loading
A thermo-mechanical analytical model and a corresponding macroscopic bonded joint finite element is presented for the analysis of orthotropic double lap joints subjected to combined thermal-mechanical loads. The analytical solution offers an improvement in accuracy over its predecessor, at the cost of increased solution complexity. However, to facilitate the use of this solution, it has been in...
متن کاملFatigue behaviour of composite adhesive lap joints
This paper is concerned with a fatigue study of composite adhesive lap joints produced from a bi-directional woven E-glass fibres and polypropylene. The adhesive used was a Bostik 7452 (Rubber & Plastics Grade) ethyl cyanoacrylate type. The effects of layer orientation, lap joint length and water immersion on the fatigue behaviour were studied. The specimens were immersed in water during period...
متن کاملDegree of Bending (DoB) in Tubular KT-Joints of Jacket Structures Subjected to Axial Loads
The fatigue life of tubular joints commonly found in offshore industry is not only dependent on the value of Hot-spot stress (HSS), but is also significantly influenced by the through-the-thickness stress distribution characterized by the degree of bending (DoB). The determination of DoB values in a tubular joint is essential for improving the accuracy of fatigue life estimation using the stres...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Experimental Techniques
سال: 2009
ISSN: 0732-8818
DOI: 10.1111/j.1747-1567.2009.00598.x