Mechanical performance of ETC RC beam with U-framed AFRP laminates under a static load condition
نویسندگان
چکیده
In the presented paper, an attempt has been made to first find permeability of Euphorbia tortilis cactus (ETC) concrete by water method and infiltration method. After that, flexural strength ETC RC beam wrapped with AFRP kelvar 149 is carried out a 2-point load test. This research aimed develop more durable, flexural, sustainable under static load. Based on state-of-the-art information available in literature, 3-layer Kelvar considered as laminate solve deflections beam. this project, RCC beams were strengthened aramid FRP sheets. Novel results are obtained different layers patterns Aramid investigation 3-layers perform well than normal As no result based hydraulic conductivity drying shrinkage laminates validated finite element (ABAQUS) conditions.
منابع مشابه
Physical Nonlinear Analysis of a Beam Under Moving Harmonic Load
A prismatic beam made of a behaviorally nonlinear material is analyzed under aharmonic load moving with a known velocity. The vibration equation of motion is derived usingHamilton principle and Euler-Lagrange Equation. The amplitude of vibration, circular frequency,bending moment, stress and deflection of the beam can be calculated by the presented solution.Considering the response of the beam,...
متن کاملload displacement behavior of concrete beam under monotonic static and low velocity impact load
experiments were carried out to observe the influence of loading type on concrete beam specimens. beam specimens made of similar concrete mixture with the same geometry were tested under three point static loading and low velocity drop weight impact loading. load – displacement behavior, absorbed energy dissipation capacity, stiffnesses, failure modes of beam specimens were obtained and discuss...
متن کاملBehaviour of U-shaped RC walls under quasi-static cyclic diagonal loading
a Earthquake Engineering and Structural Dynamics Laboratory (EESD), School of Architecture, Civil and Environmental Engineering (ENAC), École Polytechnique Fédérale de Lausanne (EPFL), EPFL ENAC IIC EESD, GC B2 515, Station 18, CH – 1015 Lausanne, Switzerland b Earthquake Engineering and Structural Dynamics Laboratory (EESD), School of Architecture, Civil and Environmental Engineering (ENAC), É...
متن کاملPerformance Intensification of DRTS under Static Load Sharing Scheme
Distributed Real Time System (DRTS) provides enormous platform for parallel applications. It is an alternative for highly expensive parallel machines. Task allocation for parallel applications over it, is a crucial phase where strategy for task allocation should be chosen to maximize the throughput and enhance the overall processor utilization. Task allocation is NP-hard or NP-complete problem....
متن کامل5 Calculations for Structures under Mechanical Load – Examples of Geometrically Simple Structural Parts under Static Loads
The mechanical properties of polymeric materials, especially those of thermoplastics, depend to a much greater extent on temperature, time, and on the magnitude and nature of an applied load than those of metals. In addition, many environmental effects, such as UV radiation or exposure to certain chemicals, play a significant role in aging and related changes in properties. This can be difficul...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Revista De La Construccion
سال: 2022
ISSN: ['0718-915X', '0717-7925']
DOI: https://doi.org/10.7764/rdlc.21.3.678