Mechanical performance for defective and repaired grouted sleeve connections under uniaxial and cyclic loadings
نویسندگان
چکیده
منابع مشابه
Shear Performance of Horizontal Joints in Short Precast Concrete Columns with Sleeve Grouted Connections under Cyclic Loading
In this study, two short precast concrete columns and two cast-in-situ concrete columns were tested under cyclic loads. It was shown that the sleeve grouted connection was equivalent to the cast-in-situ connections for short columns when the axial compression ratio was 0.6. In order to determine the influence of the axial compression ratio and the shear-span ratio on the shear capacity of the h...
متن کاملExperimental study of grouted sleeve lapping connector under tensile load
The performance of the grouted sleeve lapping connector that is used to connect reinforcement bars in a precast concrete structure is studied. A total of 63 specimens, varying in bar diameter and lap length, were tested under tensile load. The failure modes, ultimate tensile strength values and load-displacement curves of the specimens are discussed in the study. Two equations are proposed for ...
متن کاملComputational and Experimental Mechanical Modelling of a Composite Grouted Splice Sleeve Connector System
Owing to its controllable tolerance, simple operation and no need for welding at construction site, the composite system involving grouted cement material, steel material and ductile iron material is widely used as grouted splice sleeve (GSS) connector for connecting precast concrete structures. However, the current design recommendations for such a composite connection system do not accurately...
متن کاملFinite element analysis of fatigue damage in passenger-car diesel engine cylinder head under cyclic thermo-mechanical loadings
In this article, the thermo-mechanical fatigue lifetime of the cylinder head of a passenger-car diesel engine has been estimated. At the first stage, stress and strain distributions in the cylinder head have been calculated using the two-layer visco-plastic model, available in the ABAQUS software. The calibration of the model was performed, using correlating of simulated hysteresis curves and l...
متن کاملMechanical Properties of Graphene/Epoxy Nanocomposites under Static and Flexural Fatigue Loadings
In the present study, the effect of various weight fractions of graphene nanoplatelet (GPL) on flexural fatigue behavior of epoxy polymer has been investigated at room temperature and generally the temperature was monitored on the surface of specimen during each test. The flexural stiffness of grapheme nano-platelet/epoxy nanocomposites at 0.1, 0.25 and 0.5 wt. % as a main effective parameter o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Construction and Building Materials
سال: 2020
ISSN: 0950-0618
DOI: 10.1016/j.conbuildmat.2019.117233