Mechanical performance and reaction mechanism of copper slag activated with sodium silicate or sodium hydroxide
نویسندگان
چکیده
منابع مشابه
Waste activated sludge hydrolysis and acidification: A comparison between sodium hydroxide and steel slag addition.
Alkaline treatment with steel slag and NaOH addition were investigated under different pH conditions for the fermentation of waste activated sludge. Better performance was achieved in steel slag addition scenarios for both sludge hydrolysis and acidification. More solubilization of organic matters and much production of higher VFA (volatile fatty acid) in a shorter time can be achieved at pH10 ...
متن کاملMechanical response of sodium silicate glass
We propose a new method using coarse-graining and molecular dynamics to calculate structural and mechanical properties for sodium silicate glasses at different scales. Using this method we were able to describe the mechanical behavior of the material, this way a new constitutive model was developed which could be used in continuum calculations.
متن کاملThe Effect of Sodium Silicate and Acrylic on Physical and Mechanical Parameters of Thatch Mortar
In the past the earthen materials were accounted as the most widely used materials both structurally as well as finishing of traditional and historical buildings in urban and rural areas across the country. However, due to the wear and tear and lack of resistance to humidity and subjected loads, the roof and the walls covered with thatch mortars need to be annually reconstructed and repaired, w...
متن کاملLeaching Kinetics of Stibnite in Sodium Hydroxide
Spherical pellets of antimony sulphide were dissolved in 1 molar sodium hydroxide solutions at different temperatures. It was found that the shrinking core with ash layer model could satisfactorily explain the dissolution process. Using this model it was found that initially the rate controlling step is a chemical reaction with activation energy of 10.2 kJ/mol. As the ash layer builds up, diffu...
متن کاملCatalytic Studies of Sodium Hydroxide and Carbon Monoxide Reaction
We have studied the effect of ball milling on alumina mixed nickel, magnetite and Raney nickel on the reaction: 2NaOH(s) + CO (g) = Na2CO3 (s) + H2 (g) and determined the optimum particle size for the catalysts. The best performance was shown by a 2 h ball milled Raney nickel with average crystallite size of 209 Å. This reaction serves the dual purpose of carbon sequestration and yielding hydro...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Construction and Building Materials
سال: 2021
ISSN: 0950-0618
DOI: 10.1016/j.conbuildmat.2020.120900