Mechanical Model for Punching Shear and Theoretical Load-Carrying Capacity of RC Slabs with UFC Panel

Improving the Punching Shear Strength of RC Slabs by FRP and Steel Sheets

This paper deals with the modeling of punching shear failure in reinforced concrete slabs using nonlinear finite element analysis. The 3D finite element analyses (FEA) were performed with the appropriate modeling of element size and mesh, and the constitutive modeling of concrete. The FE numerical models are validated by comparing with the experimental results obtained from tested specimens and...

Punching shear capacity of reinforced concrete slabs with headed shear studs

Estimation of Punching Shear Capacity of Concrete Slabs Using Data Mining Techniques

Punching shear capacity is a key factor for governing the collapsed form of slabs. This fragile failure that occurs at the slab-column connection is called punching shear failure and has been of concern for the engineers. The most common practice in evaluating the punching strength of the concrete slabs is to use the empirical expressions available in different building design codes. The estima...

Numerical Analysis of Punching Shear Failure of Reinforced Concrete Slabs

Nearly no load bearing behaviour of reinforced concrete members allows such varied interpretations and complex discussions as the shear behaviour. Especially the three-dimensional problem of the punching shear failure of reinforced concrete members is internationally discussed. Nevertheless up to now, there is no unified design approach or even an overall accepted design model. Especially for l...

Effect of Shear Resistance on Flexural Debonding Load-Carrying Capacity of RC Beams Strengthened with Externally Bonded FRP Composites

Debonding failure is the main failure mode in flexurally strengthened reinforced concrete beams by externally bonded or near surface mounted fibre reinforced polymer (FRP) composites. It is believed that FRP debonding will be initiated if the shear stress on the concrete-FRP interface reaches the tensile strength of concrete. However, it was found through experimental and analytical studies tha...