Mechanical Model and Mechanical Durability in Membrane Electrode Assembly for Polymer Electrolyte Fuel Cells
نویسندگان
چکیده
منابع مشابه
Mechanical Properties of Nafion and Titania/Nafion Composite Membranes for Polymer Electrolyte Membrane Fuel Cells
Measurements of the mechanical and electrical properties of Nafion and Nafion/titania composite membranes in constrained environments are reported. The elastic and plastic deformation of Nafion-based materials decreases with both the temperature and water content. Nafion/titania composites have slightly higher elastic moduli. The composite membranes exhibit less strain hardening than Nafion. Co...
متن کاملCharacterizing Electrode-Level Oxygen Transport in Polymer Electrolyte Fuel Cells
Polymer electrolyte fuel cells (PEFCs) are a promising technology for environmentally friendly automobiles, among other applications. However, performance losses due to oxygen transport hindrances in the PEFC’s cathode continue to be an issue in widespread commercialization. This dissertation focuses on the transport of oxygen through the thickness of the PEFC cathode, and the effect of the cat...
متن کاملFabrication of bifunctional membrane electrode assemblies for unitised regenerative polymer electrolyte fuel cells
Introduction: The conversion and storage of energy with a high efficiency, especially a high specific energy, will be an important factor in future energy storage technologies. The relatively simple possibility to store hydrogen and oxygen with high specific energy combined with high energy conversion efficiency in fuel cells and electrolyser presents an opportunity for the use of polymer elect...
متن کاملDrops, Slugs, and Flooding in Polymer Electrolyte Membrane Fuel Cells
The process of flooding has been examined with a single-channel fuel cell that permits direct observation of liquid water motion and local current density. As product water flows through the largest pores in the hydrophobic GDL, drops detach from the surface, aggregate, and form slugs. Flooding in polymer electrolyte membrane (PEM) fuel cells occurs when liquid water slugs accumulate in the gas...
متن کاملNumerical analysis of reactant transport in the novel tubular polymer electrolyte membrane fuel cells
In present work, numerical analysis of three novel PEM fuel cells with tubular geometry was conducted. Tree different cross section was considered for PEM, namely: circular, square and triangular. Similar boundary and operational conditions is applied for all the geometries. At first, the obtained polarization curve for basic architecture fuel cells was validated with experimental data and then...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: NIPPON GOMU KYOKAISHI
سال: 2014
ISSN: 0029-022X,1884-0442
DOI: 10.2324/gomu.87.236