Mechanical Design and Manufacturing of W-Band Sheet Beam Klystron
نویسندگان
چکیده
منابع مشابه
Design of a Wiggler - Focused , Sheet Beam X Band Klystron
An X band klystron using a sheet beam and wiggler focusing was simulated using the 2 + t dimensional particle in cell code MASK.’ Simulation of the rf cavities was by means of the port approximation used in modell ing of standard klystrons.2 The wigglers, which would need permanent magnets to achieve the required field strengths, were modelled using an idealized analytic expression with an expo...
متن کاملA Sheet-beam Klystron Paper Design
What may be the first detailed cold test and computer simulation analysis of a Double Sheet Beam Klystron (DSBK) was performed at SLAC. The device was conceptually designed mechanically, and evaluated electrically for beam formation, gain, stability and efficiency. It is believed that the DSBK can be built at a relatively low cost for a future NLC collider and can produce at least 150 MW at 11....
متن کاملBeam-Cavity Interaction Circuit at W-Band
We describe the design, fabrication and bench-study of a mm-wave cavity employed as a relativistic klystron output structure. The OFE copper cavity was prepared by electrodischarge machining and diffusion bonding, cleaned, and tuned to 91.4 GHz. Measured cavity characteristics are presented and compared with theory, including quality factor, Q, coupling parameter ß, scattering matrix S11, and a...
متن کاملDevelopment of a 10 Mw Sheet Beam Klystron for the Ilc*
SLAC is developing a 10 MW, 5 Hz, 1.6 ms, L-band (1.3 GHz) Sheet-Beam Klystron as a less expensive and more compact alternative to the ILC baseline MultipleBeam Klystron. The Klystron is intended as a plugcompatible device of the same beam current and operating voltage as existing Multiple-Beam Klystrons. At this time, a beam tester has been constructed and currently is in test. The beam tester...
متن کاملDesign of a V-band High-power Sheet-beam Coupled-cavity Traveling-wave Tube
The design and analysis of a high-power wideband sheetbeam coupled-cavity traveling-wave tube operating at V-band is presented. The interaction circuit employs three-slot doubly periodic staggered-ladder coupled-cavity slow-wave structure, and a 5 : 1 aspectratio sheet electron beam is used to interact with the circuit. Combined with design of the well-matched input and output couplers, a 3-D p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Electron Devices
سال: 2017
ISSN: 0018-9383,1557-9646
DOI: 10.1109/ted.2017.2690642