Mechanical characterization of sisal reinforced cement mortar
نویسندگان
چکیده
منابع مشابه
Mechanical Behaviour of Sisal Fibre Reinforced Cement Composites
Emphasis on the advancement of new materials and technology has been there for the past few decades. The global development towards using cheap and durable materials from renewable resources contributes to sustainable development. An experimental investigation of mechanical behaviour of sisal fibrereinforced concrete is reported for making a suitable building material in terms of reinforcement....
متن کاملMechanical characterization of mortar beams
The mechanical characterization of mortars is problematic due to their sensitivity to stress concentration defects, namely pores and flaws. In this paper, data on three-point bending, Young’s modulus and fracture toughness of mortar beams are presented and discussed. Here, Weibull statistics is applied to analyse flexural strength of the developed mortar. Based on data obtained according to the...
متن کاملNanofibrillated Cellulose (nfc) as a Potential Reinforcement for High Performance Cement Mortar Composites
In this work, nanofibrillated cellulose (NFC) has been evaluated as a potential reinforcement for cement mortar composites. Two types of vegetable fibres with different composition and properties (cellulose content and microfibrillar angle), sisal, and cotton linters pulps, were initially characterised in order to assess their reinforcing capability. Sisal pulp was found to be most suitable as ...
متن کاملPhysico-Mechanical Properties of Organo-Modified Bentonite Reinforced Cement Mortars
It is demonstrated that the addition of organo-modified Na-bentonite (OMB) particles to Portland cement mortar can promote its physical and mechanical properties. A series of experimental works on some important physico-mechanical properties of Portland cement mortars mixed with various dosages of hydrophobic OMB were performed. The obtained results confirm that the OMB provides a dense packing...
متن کاملThE EFFECT OF METAKOLIN, MICROSILICA AND NANOSILICA ON THE MECHANICAL PROPERTIES AND MICROSTRUCTURE OF CEMENT MORTAR
Different mineral admixtures of Indian metakaolin, Iranian silica fume and nanosilica were used to produce high performance mortars. Two different sands types with grain size of 0.015-4mm were mixed with type II Portland cement, polycarboxylate superplasticizer,mineral admixture with 650kg/m3 cement content and water/cement ratio of 0.35. Different amount of cement was replaced by metakaolin or...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Theoretical and Applied Mechanics Letters
سال: 2014
ISSN: 2095-0349
DOI: 10.1063/2.1406102