Mechanical Characterization of High-Temperature Carbon Fiber-Polyphenylene Sulfide Composites for Large Area Extrusion Deposition Additive Manufacturing
نویسندگان
چکیده
منابع مشابه
Additive Manufacturing of Cfrp Composites Using Fused Deposition Modeling: Effects of Carbon Fiber Content and Length
Additive manufacturing (AM) technologies have been successfully applied in various applications. Fused deposition modeling (FDM), one of popular AM techniques, is most widely used method for manufacturing of plastic materials. Due to the poor strength properties of pure plastic materials, there is a critical need to improve mechanical properties for FDMfabricated pure plastic parts. One of the ...
متن کاملMechanical Characterization of Glass-Basalt-Carbon/Polyester Hybrid Composites
Influence of the stacking sequences of hybrid composites on the tensile strength, flexural strength, inter-laminar shear strength (ILSS) and impact energy was investigated. The hybrid glass-basalt-carbon/polyester composite laminates were processed by hand lay-up procedure at room temperature. The fracture surface of the composite laminates after the tension and flexural test was examined by sc...
متن کاملAl2O3/ZrO2/Y3Al5O12 Composites: A High-Temperature Mechanical Characterization
An Al2O3/5 vol%·ZrO2/5 vol%·Y3Al5O12 (YAG) tri-phase composite was manufactured by surface modification of an alumina powder with inorganic precursors of the second phases. The bulk materials were produced by die-pressing and pressureless sintering at 1500 °C, obtaining fully dense, homogenous samples, with ultra-fine ZrO2 and YAG grains dispersed in a sub-micronic alumina matrix. The high temp...
متن کاملMechanical Properties of Carbon Fiber Composites for Environmental Applications
Activated carbon fiber composites show gnat promise as fixed-bed catalytic reactors for use in environmental applications such as flue gas clean-up and ground water decontamination. A novel manufacturing process produces low density composites h m chopped carbon fibers and binders. These composites have high permeability, can be activated to have high surface area, and have many potential envir...
متن کاملA Procedure for Preparation of Semi-activated Carbon Fiber without any Treatment under High Temperature
A procedure for preparation of semi-activated carbon fiber (SACF) without any treatment under high temperature was proposed. The first step of the procedure is coating of an inorganic fiber (E-glass fiber) by an adsorbent mixture including powder activated carbon, methyl cellulose and water. In this work a set of experiments was performed to attain appropriate adsorbent mixture for good quality...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Additive Manufacturing
سال: 2020
ISSN: 2214-8604
DOI: 10.1016/j.addma.2020.101255