Mechanical characterization of glass and jute fiber-based hybrid composites fabricated through compression molding technique

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Mechanical Characterization of Glass-Basalt-Carbon/Polyester Hybrid Composites

Influence of the stacking sequences of hybrid composites on the tensile strength, flexural strength, inter-laminar shear strength (ILSS) and impact energy was investigated. The hybrid glass-basalt-carbon/polyester composite laminates were processed by hand lay-up procedure at room temperature. The fracture surface of the composite laminates after the tension and flexural test was examined by sc...

متن کامل

Comparative analysis of the mechanical and thermal properties of polyester hybrid composites reinforced by jute and glass fiber

This work describes the study to investigate and compare the mechanical and thermal properties of raw jute and glass fiber reinforced polyester hybrid composites. To improve the mechanical properties, jute fiber was hybridized with glass fiber. Polyester resin, jute and glass fibers were laminated in three weight ratios(77/23/0, 68/25/7 and 56/21/23) respectively to form composites. The tensile...

متن کامل

Flexural Behavior of Needle Punch Glass/jute Hybrid Mat Composites

In this research, creation of higher mechanical natural fiber mat composites was proposed. The hybrid mat with jute and glass mat was fabricated by needle punching system, in which jute mat was placed on glass mat. The ratio of jute and glass mat layers was set to be 1:0,1:1,1:2 and 2:1, respectively. The composites were fabricated by hand-lay up method with unsaturated polyester resin after ne...

متن کامل

Compression Molding of Refractive and Diffractive Hybrid Glass Lenses

INTRODUCTION Refractive and diffractive hybrid lenses have been designed and implemented for some industrial applications. These optical elements however are limited to low volume production or specific materials such as polymers. Although plastic lenses can be fabricated using injection molding into different geometries at high volume, these optics do not perform well under rigorous conditions...

متن کامل

Impact Properties of Jute and Jute Hybrid Reinforced Composites

The use of natural fiber reinforced composites has continuously increased during recent years due to their low density, low cost and environmental friendliness. At current study, a preliminary investigation on the impact properties and morphologies of unsaturated polyester reinforced by jute woven fabric from the used coffee bags with different moisture contents were carried out. Additionally, ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: International Journal of Material Forming

سال: 2021

ISSN: 1960-6206,1960-6214

DOI: 10.1007/s12289-021-01624-w