Mechanical Characterization of a Twill Weave Carbon Fabric for Macro-scale Forming Simulation

Characterisation of the mechanical and fracture properties of a uni-weave carbon fibre/epoxy non-crimp fabric composite

A complete database of the mechanical properties of an epoxy polymer reinforced with uni-weave carbon fibre non-crimp fabric (NCF) is established. In-plane and through-the-thickness tests were performed on unidirectional laminates under normal loading and shear loading. The response under cyclic shear loading was also measured. The material has been characterised in terms of stiffness, strength...

Tensile behavior simulation of woven fabric with different weave pattern based on finite element method

Sedimentation velocity spins a new weave for an old fabric.

Sedimentation velocity analysis is a powerful tool for the investigation of biological macromolecules under a wide range of solution conditions. If carefully applied, it can be an effective tool for the characterization of interacting systems in solution. It is rapidly becoming a method of choice among the biotechnology community. In recent years, there have been notable advances in the ease of...

a study on thermodynamic models for simulation of 1,3 butadiene purification columns

attempts have been made to study the thermodynamic behavior of 1,3 butadiene purification columns with the aim of retrofitting those columns to more energy efficient separation schemes. 1,3 butadiene is purified in two columns in series through being separated from methyl acetylene and 1,2 butadiene in the first and second column respectively. comparisons have been made among different therm...

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...