Mechanical Characterization and Static Analysis of Natural Fiber Based Composite Propeller Blade
نویسندگان
چکیده
منابع مشابه
Whole-blade Propeller Dwi
Introduction PROPELLER [1] is a variant of multi-shot FSE technique, providing a high-resolution DWI with excellent immunity to offresonance. Its self-navigated nature around the center of K-space also allows for motion correction. The odd/even echo phase inconsistencies in the non-CPMG echo train were addressed using the “split-blade” method [2], where the blade width was reduced by a factor o...
متن کاملstudy and characterization of fiber optical gyroscope مطالعه و مشخصه یابی ژیروسکوپ فیبر نوری(تار نوری)
ژیروسکوپ فیبر نوری fog بر اساس پدیده تداخل ساگنام دو پرتو لیزری از یک فیبر نوری بسیار طولانی داده های لازم را فراهم می آورد
15 صفحه اولPhysico-Mechanical and Tribological Properties of Glass Fiber based Epoxy Hybrid Natural Composite
Polymeric materials reinforced with synthetic fibers like glass, carbon, and aramid provide advantage of high stiffness and strength to weight ratio as compared to conventional materials like wood, concrete etc. Despite of these favours modern researches are going on in the field of natural composites because of low initial cost and availability of ease. I the light of these the present experim...
متن کاملMECHANICAL CHARACTERIZATION AND ANALYSIS OF RANDOMLY DISTRIBUTED SHORT BANANA FIBER REINFORCED EPOXY COMPOSITES
Short banana fiber reinforced composites have been prepared in laboratory to determine mechanical properties. It has been observed that as soon as the percentage of the banana fiber increases slightly there is a tremendous increase in ultimate tensile strength, % of strain and young modulus of elasticity. Reinforcement of banana fibers in epoxy resin increases stiffness and decreases damping pr...
متن کاملAnalysis of Stresses in Helicopter Composite blade in Hovering Maneuver
The main purpose of this article is the structural analysis of a composite blade of a selected helicopter. In this study, the stresses on rotors' blades caused by centrifugal forces, lift, drag and torque are analyzed. The governing equations of the structure behavior and solving processes were carried out by MATLAB software, and simulation is carried out by ABAQUS software, and they are compar...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Evergreen
سال: 2023
ISSN: ['2189-0420', '2432-5953']
DOI: https://doi.org/10.5109/6792832