Mechanical Behavior of Molybdenum Disilicide-Based Alloys
نویسندگان
چکیده
منابع مشابه
the investigation of synthesis and phase transformation in molybdenum disilicide by mechanical alloying
the molybdenum dicilicide is an intermetallic compound with two allotropies tetragonal ?-mosi2 and hexagonal ?-mosi2.the ?-mosi2 phase is established to 1900 ?c and ?-mosi2 phase from 1900 to 2050 ?c. this material has considerable properties that provide different applications in different industries such as air-space industry and gas turbines. the molybdenum synthesis can be down in various w...
متن کاملAging and Mechanical Behavior of Be-Treated 7075 Aluminum Alloys
The present study was undertaken to investigate the effect of pre-aging and aging parameters (time and temperature) on the mechanical properties of Al-Mg-Zn (7075) alloys. Ultimate tensile strength, 0.5% offset yield strength and % elongation measurements were carried out on specimens prepared from cast and heat treated 7075 alloys. Aging treatments were carried out for the as solution treated ...
متن کاملAging and Mechanical Behavior of Be-Treated 7075 Aluminum Alloys
The present study was undertaken to investigate the effect of pre-aging and aging parameters (time and temperature) on the mechanical properties of Al-Mg-Zn (7075) alloys. Ultimate tensile strength, 0.5% offset yield strength and % elongation measurements were carried out on specimens prepared from cast and heat treated 7075 alloys. Aging treatments were carried out for the as solution treated ...
متن کاملHigh Temperature Erosion- Oxidation Behavior of Nickel- Based Alloys Containing Mo in Fluidized Bed Waste Incineration
High-temperature erosion-oxidation behavior of nickel-based alloys containing 0-7 wt.% Mo in fluidized bed waste incineration conditions was studied. A stream of hot condensed air with a flow rate of 25 L/min caused hot silica sand (700 °C) mixed with 0.5 wt.% of chloride salts to hit the specimens for 250 h. By removing the erosive factor, the high-temperature oxidation behavior of the alloys ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MRS Proceedings
سال: 2000
ISSN: 0272-9172,1946-4274
DOI: 10.1557/proc-646-n4.7.1