Mechanical and Thermal Properties of Kenaf Fiber Reinforced Polypropylene/Magnesium Hydroxide Composites

Mechanical and Thermal Properties of Bamboo Pulp Fiber Reinforced Polyethylene Composites

The purpose of this study was to investigate the mechanical and thermal properties of high-density polyethylene (HDPE) composites reinforced by bamboo pulp fibers (BPF). Using a twin-screw extruder, polymer composites were fabricated using BPF and bamboo flour (BF) as the reinforcement and HDPE as the matrix. Tensile and flexural tests of the HDPE composites were performed to determine the mech...

Mechanical Properties of SiC Fiber- Reinforced Reaction-Bonded Si3N4 Composites

Mechanical properties of woven glass fiber-reinforced composites.

The aim of this investigation was to measure the flexural and compressive strengths and the corresponding moduli of cylindrical composite specimens reinforced with woven glass fiber. Test specimens were made by light-curing urethane dimethacrylate oligomer with woven glass fiber of 0.18-mm standard thickness. Tests were conducted using four reinforcement methods and two specimen diameters. Flex...

Evaluation of Flexural and Tensile Properties of Short Kenaf Fiber Reinforced Green Composites

The present work study flexural and tensile behavior of short Kenaf fiber reinforced composites. The fibers are chemically treated in 2% NaOH solution at room temperature. Short fibers of 4mm and 8 mm are used in the present work. The composite lamina is prepared by hand molding using isopthalic polyester resin. Flexural test and tension tests are carried out as per ASTM standards. The flexural...

Flexural Properties of Kenaf Fibre Mat Reinforced PLA Composites

The potential use of natural biopolymer composites in a variety of applications that requires biodegradability and better mechanical properties has renewed many researchers interest on the composites. This research involves the analysis of flexural properties for natural fibers specifically kenaffiber mat in a polylactic acid (PLA) matrix (KMPLA). The polylactic acid has been chosen as a matrix...