Mechanical and Microstructural Studies of High Performance Concrete with Condensed Silica Fume

نویسندگان

چکیده

This article is an extended version of the conference paper “Influence silica fume on mechanical and fracture properties high performance concrete” published in Procedia Structural Integrity as a part Special Issue for 3rd International Conference (ICSI 2019). Tests were carried out to evaluate compressive strength, tensile splitting modulus elasticity, flexural concretes (HPC) having different levels condensed (CSF) replacements cement. It was found that CSF replacement cement by up 25% may have favorable effect properties. HPC containing characterized quite large increases strength (up 14%) (16%). However, most significant improvements obtained (26%) energy (30.5%). There slight reductions 2% elastic modulus, at level substitution Microstructural studies showed narrowest microcracks smallest pores interfacial transition zone (ITZ) between paste grains aggregate occurred 10% CSF. In addition, reduction ITZ around formation more high-strength hydration products observed all CSF-added HPCs. The outcomes reported can successfully replace suggested should not exceed 20%.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effects of Silica Fume in Conventional Concrete

The production of tailor made high strength and high performance concrete are made by incorporating silica fume into the normal concrete and it is a routine one in the present days. The mix proportioning is intricate and the design parameters are increased due to the incorporation of silica fume in conventional concrete. The aim of this paper is to look into the different mechanical properties ...

متن کامل

Influence of Silica Fume on Normal Concrete

The incorporation of silica fume into the normal concrete is a routine one in the present days to produce the tailor made high strength and high performance concrete. The design parameters are increasing with the incorporation of silica fume in conventional concrete and the mix proportioning is becoming complex. The main objective of this paper has been made to investigate the different mechani...

متن کامل

Improving the workability and strength of silica fume concrete by using silane-treated silica fume

Mortar with high workability even without a water-reducing agent and with high tensile and compressive strengths (3.1 and 78 MPa, respectively) was obtained by using as an admixture silica fume that had been surface treated with a silane coupling agent. The treatment enhanced the wettability of silica fume by water, thereby increasing the workability of the mortar mix. It also enhanced the bond...

متن کامل

Influence of Nano-Silica and Silica Fume in the Steel Corrosion Embedded in Concrete

Corrosion of steel is one of the most important potential dangers and threats in concrete structures. Corrosion of steel embedded in reinforced concrete plays a key role in reducing the strength and durability of reinforced concrete. Several studies have proposed that alternative approaches to enhancing the performance of reinforced concrete and its resistance to corrosion. In this study, the r...

متن کامل

Influence of Silica Fume on Chloride Resistance of Concrete

A series of concrete slabs were cast with 0, 7, and 12% by mass silica fume replacement of cement at W/CM = 0.35, 0.40, and 0.45. After either moist or steam curing, a variety of chloride resistance tests were performed. These included AASHTO T259, modified T259, T277, as well as several bulk diffusion tests and sorptivity tests. Results indicate that the use of properly dispersed silica fume r...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Applied sciences

سال: 2023

ISSN: ['2076-3417']

DOI: https://doi.org/10.3390/app13042510