Mechanical and Microstructural Properties of Green Roof Slab Under Acid Rain Attack

نویسندگان

چکیده

Abstract A flat slab is widely used as an alternative form of a house roof. The roof work does not take long. Its simple structure beautiful to homeowners with minimalist concept. Because this use covering, it very susceptible the influence sea. Damage often occurs. Acid rain causes concrete become porous material. This investigation aims produce durable solve existing problems. test object was reinforced 30cmx60cmx15cm. Three types compressive strength were used, namely 20 MPa, 30 and 35 MPa. At same time, green concept by replacing some cement rice husk ash. effect acid carried out immersing specimens in solution for 28 days, 90 120 days. All samples tested flexural their mechanical properties XRD microstructural properties. results show that ash can reduce damage occurs due acid. gypsum calcium oxide content phenomenon damage.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

determination of some physical and mechanical properties red bean

چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...

15 صفحه اول

Mechanical and Microstructural Properties of Biological Materials

Biological materials, such as isolated protein networks, tissues and living cells are extremely heterogeneous and contain structures on length scales from nanometers to hundreds of microns. Their complex geometries and sensitivity to environmental conditions make traditional measurements of structure and mechanics difficult, challenging experimenters to develop new techniques. In this work, we ...

متن کامل

Effect of Mechanical Alloying and Sintering on Phase Transformation, Microstructural Evolution, Mechanical Properties and Density of Zr-Cr Alloy

The purpose of present research was production ofZr-based alloy as the nuclear fuel cladding by mechanical alloying (MA) and sintering process. Firstly, Zr and Cr powders were mechanically alloyed to produce the refractory and hard Zr-10 wt% Cr alloy, and then, the powder mixtures were consolidated by press and following sintering at temperature of 800˚C min. The phase evolution, microstructura...

متن کامل

Mechanical properties and microstructural change of W–Y2O3 alloy under helium irradiation

A wet-chemical method combined with spark plasma sintering was used to prepare a W-Y2O3 alloy. High-temperature tensile tests and nano-indentation microhardness tests were used to characterize the mechanical properties of the alloy. After He-ion irradiation, fuzz and He bubbles were observed on the irradiated surface. The irradiation embrittlement was reflected by the crack indentations formed ...

متن کامل

INVESTIGATION OF MICROSTRUCTURAL AND MECHANICAL PROPERTIES OF 7075 AL ALLOYPREPARED BY SIMA METHOD

The microstructure and mechanical properties of 7075 wrought aluminum alloy produced by strain induced melt activation (SIMA) route were investigated.Also liquid volume fraction measurement was studied by three procedures. Remelting process was carried out in the range of 560 to 610 °C for 20 min holding. The microstructure in the semi-solid state consists of fine spherical solid grains surroun...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: IOP conference series

سال: 2023

ISSN: ['1757-899X', '1757-8981']

DOI: https://doi.org/10.1088/1755-1315/1209/1/012001