Mechanical and Microstructural Characterization of Aluminium Alloy, EN AC-Al Si12CuNiMg
نویسندگان
چکیده
منابع مشابه
Effect of Mechanical Alloying and Sintering on Phase Transformation, Microstructural Evolution, Mechanical Properties and Density of Zr-Cr Alloy
The purpose of present research was production ofZr-based alloy as the nuclear fuel cladding by mechanical alloying (MA) and sintering process. Firstly, Zr and Cr powders were mechanically alloyed to produce the refractory and hard Zr-10 wt% Cr alloy, and then, the powder mixtures were consolidated by press and following sintering at temperature of 800˚C min. The phase evolution, microstructura...
متن کاملA Comparative Study of Aluminium Alloy and Titanium Alloy Comparison of AL-7175 alloy and Ti6Al4V alloy (Literature Survey Paper)
About 50% of metals used in Aerospace industries are Aluminium and Titanium alloys, Alloys such as Ti6Al4V, AL-7175, and AL7075 are used extensively in space vehicles, aviation, and automotive industries for having enhanced mechanical properties like High strength to weight ratio, low Thermal Expansion and better Corrosion resistance. Comparison of properties Aluminium and Titanium alloys shows...
متن کاملMicrostructure Characterization and Mechanical Properties of Al-SiCp Composites
In recent years the aluminum matrix composites are gaining wide spread applications in automotive, aerospace, defense, sport and other industries. The reason for this is their exciting properties like high specific strength, stiffness, hardness, wear resistance, dimensional stability and designer flexibility. The present work reports on mechanical properties and microstructure analysis of Al-Si...
متن کاملMicrostructure and mechanical characteristics of dissimilar aluminium alloy joining employing gas tungsten arc welding
Despite the increased use of aluminium alloys in several industries, their common concern is the difficulty of joining dissimilar alloys using welding techniques. Based on this, the primary purpose of this research is to assess the mechanical characteristics of dissimilar joining of heat-treatable 6061 and non-heat-treatable 5083 aluminium alloys by gas tungsten arc welding and to discover the ...
متن کاملINVESTIGATION OF MICROSTRUCTURAL AND MECHANICAL PROPERTIES OF 7075 AL ALLOYPREPARED BY SIMA METHOD
The microstructure and mechanical properties of 7075 wrought aluminum alloy produced by strain induced melt activation (SIMA) route were investigated.Also liquid volume fraction measurement was studied by three procedures. Remelting process was carried out in the range of 560 to 610 °C for 20 min holding. The microstructure in the semi-solid state consists of fine spherical solid grains surroun...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Archives of Foundry Engineering
سال: 2023
ISSN: ['1897-3310', '2299-2944']
DOI: https://doi.org/10.24425/afe.2022.140234