Mechanical and chemical analyses across dental porcelain fused to CP titanium or Ti6Al4V
نویسندگان
چکیده
منابع مشابه
Bond characteristics of porcelain fused to cast and milled titanium
Karina Andrea Novaes Olivieri 1 Maximiliano Piero Neisser 2 Marco Antônio Bottino 2 Milton Edson Miranda 3 1PhD, Post-graduated, Department of Dental Materials and Prosthodontics, Faculty of Odontology of São José dos Campos, UNESP, Brazil and Associated Professor, Department of Prosthodontics, Faculty of Odontology São Leopoldo Mandic – CampinasBrazil. 2PhD, Associated Professor, Department of...
متن کاملEvaluation of brittleness of porcelain fused to pure titanium by fracture toughness, hardness and fracture energy.
To elucidate the cause of brittleness of porcelain fused to pure titanium (PFPT) which leads to chipping and cracking similar to that of conventional porcelain in clinical use, fracture toughness KIc, hardness (Hv and Hk) and fracture energy gamma reflecting the bonding energy of atoms were evaluated. In KIc there were no differences between PFPT and conventional porcelain, nor for Hv and Hk, b...
متن کاملCross-sectional TEM analysis of porcelain fused to gold-coated titanium.
This study investigated the interfacial microstructure between gold-coated titanium and low-fusing porcelain. The square surfaces of cast titanium split rods were sputter-coated with gold using a sputter coater at 40 mA for 1,000 seconds. Specimens were prepared for transmission electron microscopy (TEM) by cutting and polishing two pieces of the gold-coated split-rod specimens, which were glue...
متن کاملThe Microstructure and Mechanical Properties of Friction Stir Welded Ti6al4v Titanium Alloy under Β Transus Temperature
1 Faculty of Aerospace Engineering, Shenyang Aerospace University, No. 37 Daoyi South Avenue, Daoyi Development District, Shenyang 110136, China 2 State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, No. 92 West Dazhi street, Nangang District, Harbin 100024, China 3 Beijing Aeronautical Manufacturing Technology Research Institute, No. 1 Dongjun Village, Chaoyang...
متن کاملClinical Evaluation of Porcelain Fused to Metal Inlay-Retained Bridges
Introduction: Inlay retained bridges represent a conservative approach to restore single missing posterior tooth. Objective: To evaluate the clinical performance and survival rate of inlay retained fixed partial dentures. Materials and methods: A total of 12 patients were included in this clinical study. The patient selection, preparation technique as well as restoration fabrication followed cu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Science and Engineering: C
سال: 2014
ISSN: 0928-4931
DOI: 10.1016/j.msec.2013.12.030