Measurement of Ultrasonic Velocity in Solids.
نویسندگان
چکیده
منابع مشابه
Measurement of ultrasonic velocity in several biological tissues.
-The ultrasonic velocity at 100MHz and room temperature (23-26°C) was measured in fresh, excised mammalian liver, kidney, spleen, and pancreas and mouse kidney. The results show excellent agreement with measurements at low MHz frequencies. A significant velocity difference is reported between kidney cortex and medulla, but no difference was observed between the exocrine and islets of Langerhans...
متن کاملMeasurement of Ultrasonic Velocity and Attenuation at Elevated Temperatures
Ultrasonic non-destructive testing is a sensitive tool not only for defect detection and evaluation in plant components and structures, but also to characterise microstructural features and for evaluation of mechanical properties. Even though, it provides high sensitivity and reliability for such measurements and very versatile to use at ambient temperatures, the technique fails when it is exte...
متن کاملUltrasonic Wind Velocity Measurement Based on Phase Discrimination Technique
According to the shortcomings of the existing ultrasonic wind velocity measurement device, for instance, complexity of circuit and difficulty of signal processing, a new ultrasonic wind velocity measurement is put forward based on phase discrimination and a new sensor configuration as well. Thus, a system model is built. Firstly, an equilateral triangle should be constituted by an ultrasonic em...
متن کاملUltrasonic hammer produces hot spots in solids.
Mechanical action can produce dramatic physical and mechanochemical effects when the energy is spatially or temporally concentrated. An important example of such phenomena in solids is the mechanical initiation of explosions, which has long been speculated to result from 'hot spot' generation at localized microstructures in the energetic material. Direct experimental evidence of such hot spots,...
متن کاملMeasurement of velocity in rotational flows using ultrasonic anemometry: the flowmeter
In this paper a previously developed theoretical model of the measurement process performed by a transittime ultrasonic anemometer is applied to a fluid flowing through a circular section pipe. This model considers the influence of the shift of the acoustic pulse trajectory from straight propagation due to the flow on the measured speed. The aim of this work is to estimate the errors induced in...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Welding Society
سال: 1993
ISSN: 0021-4787,1883-7204
DOI: 10.2207/qjjws1943.62.419