Measurement of shear strength and interface parameters by multi-stage large-scale direct/interface shear and pull-out tests
نویسندگان
چکیده
منابع مشابه
Push-out tests on shear studs in high strength concrete
A lot of push-out tests of shear studs embedded in normal strength concrete were conducted. So current design code methods of the shear studs are based on the test results of studs embedded in normal strength concrete. It also appeared that the strength of connector and the concrete strength are the main factors affecting the behavior of shear connections. But push-out test data of studs embedd...
متن کاملNondestructive measurements of implant-bone interface shear modulus and effects of implant geometry in pull-out tests.
Push-out and pull-out tests are used for destructive evaluation of implant-bone interface strength. Because nondestructive mechanical tests would allow maintenance of an intact interface for subsequent morphological study, we developed such a test to determine the shear modulus of the interface by measuring the shear deformation of a thin layer adjacent to the implant. A polyurethane foam model...
متن کاملInfluences of Surface Characteristics and Modified Asphalt Binders on Interface Shear Strength
Weak bonding between layers of pavement leads to damages on the composite pavement. Bonding plays an important role in the durability and maintenance of composite pavement layers. The present study evaluates the factors effective in bond strength of the interface between concrete and asphalt pavements. The factors considered for this purpose include steel slag percentage in the concrete pavemen...
متن کاملEffects of Ballast Degradation on Shear Strength Behavior from Large-scale Triaxial Tests
Ballast, typically comprising large sized aggregate particles with uniform gradation, is an essential layer in the railroad track substructure. Functions of ballast include facilitating load distribution and drainage, maintaining track geometry and track stability, and providing track resilience and noise absorption. Throughout its service life, ballast goes through changes in gradation and par...
متن کاملA shear-lag model with a cohesive fibre–matrix interface for analysis of fibre pull-out
A shear-lag model with a cohesive fibre–matrix interface has been developed for the analysis of stress transfer between the fibre and the matrix in fibre-reinforced composites in this paper. A bilinear cohesive damage evolution law is used to describe the fibre–matrix interface behaviour. The governing equations for the interfacial shear stress and the axial stress in the fibre are derived. Acc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Measurement Science and Technology
سال: 2018
ISSN: 0957-0233,1361-6501
DOI: 10.1088/1361-6501/aacb8a