Measurement of Fatigue Crack Propagation by Eddy Current Method
نویسندگان
چکیده
منابع مشابه
Quantitative Measurement of Crack Parameters Using Microwave Eddy-Current Techniques
The objectives of this work were to develop an electromagnetic scattering model that can be used to predict the microwave scattering from a crack in a metallic surface, and to evaluate the potential of using microwave scattering measurements to determine the dimensions of the crack. The .initial approach to this problem has been to model the surface crack as a section of rectangular waveguide s...
متن کاملHealing of Fatigue Crack in 1045 Steel by Using Eddy Current Treatment
In order to investigate the methods to heal fatigue cracks in metals, tubular specimens of 1045 steel with axial and radial fatigue cracks were treated under the eddy current. The optical microscope was employed to examine the change of fatigue cracks of specimens before and after the eddy current treatment. The results show that the fatigue cracks along the axial direction of the specimen coul...
متن کاملExtended Finite Element Method for Fretting Fatigue Crack Propagation
In this paper, the extended finite element method (X-FEM) is considered for the analysis of fretting fatigue problems. A two-dimensional implementation of the XFEM is carried out within the finite element software ABAQUS by means of user subroutines, and crack propagation in fretting fatigue problems is investigated. On utilizing the non-linear contact capabilities of this code, the numerical t...
متن کاملStochastic modeling of fatigue crack propagation
This paper presents a stochastic model of fatigue-induced crack propagation in metallic materials. The crack growth rate predicted by the model is guaranteed to be non-negative. The model structure is built upon the underlying principle of Karhunen±Lo eve expansion and does not require solutions of stochastic dierential equations in either Wiener integral or Itô integral setting. As such this ...
متن کاملFatigue crack propagation in microcapsule - toughened epoxy
The addition of liquid-filled urea-formaldehyde (UF) microcapsules to an epoxy matrix leads to significant reduction in fatigue crack growth rate and corresponding increase in fatigue life. Mode-I fatigue crack propagation is measured using a tapered doublecantilever beam (TDCB) specimen for a range of microcapsule concentrations and sizes: 0, 5, 10, and 20% by weight and 50, 180, and 460 lm di...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Materials Science, Japan
سال: 1968
ISSN: 1880-7488,0514-5163
DOI: 10.2472/jsms.17.182