Measurement of Dynamic Strain Aging in Pearlitic Steels by Tensile Test.
نویسندگان
چکیده
منابع مشابه
an investication into the strain aging of low carbon steels
in this paper, the effect of prestrain on strain aging of low carbon steels, in the temperatures of 100°c and 200°c and the aging time of 50 minutes, and also the effect of aging temperature on strain aging in a constant aging time and prestrain, are investigated. the results of experiments show that with increasing the amount of prestrain, the increase in yield stress and ultimate tensile stre...
متن کاملPREDICTION OF CRITICAL STRESS AND STRAIN FOR THE ONSET OF DYNAMIC RECRYSTALLIZATION IN PLAIN CARBON STEELS
The aim of the present study is the prediction of critical conditions (including critical strain and flow stress) for the initiation of dynamic recrystallization during thermo-mechanical processing of plain carbon steels. For this propose, torsion tests were conducted at different temperature (1050, 1100 and 1150˚C) and strain rates (0.002, 0.02 and 0.2/s). All flow curves showed a peak st...
متن کاملElectropulse - induced cementite nanoparticle formation in deformed pearlitic steels
Passing one electric-current pulse through deformed pearlitic steel wires at room temperature causes the formation of cementite particles around 30 nm in size. This is found not only in some particular locations but throughout the cementite area, which reveals a different mechanism from traditional spheroidization of cementite plates because the latter leads to the formation of particles with m...
متن کاملDynamic tensile test and specimen design of auto-body steel sheet at the intermediate strain rate
In this paper, the tensile testing method at the intermediate strain rate is established and tensile tests of steel sheets for an auto-body have been performed to evaluate dynamic material properties. A high speed tensile testing machine has been developed for tensile tests at the intermediate strain rate. A simple jig fixture for gripping a specimen has been designed to diminish the load ringi...
متن کاملMechanical properties determination of dual-phase steels using uniaxial tensile and hydraulic bulge test
Numerical simulations of sheet metal forming processes need the establishment of highly reliable results, which in turn need the accurate identification of mechanical properties. In this paper a study is presented on the choice of the characterization function of flow stress-strain curve of sheet metal materials, as well as the selection of the best yield locus, based on experimental uniaxial t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 2003
ISSN: 0915-1559
DOI: 10.2355/isijinternational.43.428