Measurement of Delamination Fatigue Threshold and Its Crack-Length Dependency for CF/PEEK Laminates.

Stress intensity factors as the fracture parameters for delamination crack growth in composite laminates

A ``mutual integral'' approach is used to calculate the mixed-mode stress intensity factors for a free-edge delamination crack in a laminate under tensile loading conditions. This ``mutual integral'' approach, for generalized plane strain conditions, is based on the application of the path-independent J integral to a linear combination of three solutions: one, the problem of the laminate to be ...

Lap Splice Length and Fatigue Performance of Frp Laminates

In this paper, the lap splice length and the long-term (fatigue) performance of lap-spliced carbon FRP laminates were investigated. Lap-spliced CFRP coupon specimens were fabricated with a splice length of 12.7, 25.4, 38.1, 50.8, 76.2, and 101.6 mm. To eliminate the bending on the lap splice joint, a symmetric specimen configuration was adopted. The width of the specimens was 38.1 mm. These spe...

Analyses of Fatigue Crack Growth and Closure Near Threshold Conditions for Large-Crack Behavior

A plasticity-induced crack-closure model was used to study fatigue crack growth and closure in thin 2024-T3 aluminum alloy under constant-R and constant-Kmax threshold testing procedures. Two methods of calculating crack-opening stresses were compared. One method was based on contact-K analyses and the other on contact crack-openingdisplacement (COD) analyses. These methods gave nearly identica...

Practical Methods for Crack Length Measurement and Fatigue Crack Initiation Detection Using Ion-Sputtered Film and Crack Growth Characteristics in Glass and Ceramics

Near-threshold fatigue crack growth in bulk metallic glass composites

A major drawback in using bulk metallic glasses (BMGs) as structural materials is their extremely poor fatigue performance. One way to alleviate this problem is through the composite route, in which second phases are introduced into the glass to arrest crack growth. In this paper, the fatigue crack growth behavior of in situ reinforced BMGs with crystalline dendrites, which are tailored to impa...