Measurement of bubble sizes in fluidised beds using electrical capacitance tomography
نویسندگان
چکیده
منابع مشابه
Mass Flow Measurement of Biofuels using Electrical Capacitance Tomography
Biomass provides 10% of the global energy supply and electricity generation from biomass and waste is expected to increase by a factor of 4 by 2030. Currently efficiency of biomass power generation is poor and IEA targets improvements from 18% to 25% by 2030 [1]. Such increases in efficiency will require significant new technology and accurate real-time measurement of the flow of these highly v...
متن کاملElectrical Capacitance Tomography System
Electrical Capacitance Tomography is a non intruding technique used in industries. It is based on measuring the capacitance of multi-electrode ECT sensor produced by the change in dielectricity or due to change in concentration of material. With the use of computed values, a cross sectional image of the material placed in the dielectric medium is obtained. ECT system can be used in chemical fie...
متن کاملInvestigation of the Influence of Bubble-bubble Interactions on the Hydrodynamics of Bubbling Gas-solid Fluidised Beds Using the Discrete Bubble Model
To investigate the hydrodynamic behaviour of industrial scale bubbling fluidised bed reactors, a 3D Discrete Bubble Model (DBM) has been developed. In the DBM, an Euler-Lagrange model, the bubbles are treated as discrete elements and the bubble trajectories are tracked individually, while the emulsion phase is considered as a continuum and is described with the continuity and Navier-Stokes equa...
متن کاملVoid Fraction Estimation by Using Electrical Capacitance Tomography and Differential Pressure in an Air-Water Co-Current Bubble Column
In process industries, the measurement of void fraction is considerably important for sustainable operations. The erroneous calculation of void fraction is inevitably be the cause of many industrial accidents such as loss of coolant accidents in reactor operations, sweet corrosions in sub-sea oil and gas pipelines and an in-efficient process control of chemical plants. Keeping in view the impor...
متن کاملLiquid Film Thickness Estimation using Electrical Capacitance Tomography
In air/oil lubrication systems, the flow parameters, e.g., flow pattern, liquid film thickness, and air/oil flow rate, are of great importance to the transportation efficiency. In most cases, the on-going two-phase flow is annular flow with the oil moving along the tube wall and the air travelling at high speed in the center. This usually results in the formation of a thin oil film, the thickne...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Chemical Engineering Science
سال: 2015
ISSN: 0009-2509
DOI: 10.1016/j.ces.2015.01.011