Measurement and simulation calculation of wire bow angle during the diamond wire saw process
نویسندگان
چکیده
The wire bow angle is an important factor that affects the shape precision of ingot after diamond sawing process. In this research, angles inside and outside were recorded with a high-speed camera. effects processing parameters such as tension force, feed speed, velocity on analyzed. A numerical simulation model in process presented paper to describe ingot. It was shown smaller than for all parameters. improved increase speed decrease force. results measurement calculation similar
منابع مشابه
Investigation and Simulation of Wire Non-Asymmetric Rolling Process
The non-asymmetric rolling process of copper and brass wire has been simulated with the Abaqus software. Presented finite element model in this simulation of rolling predicted output curvature and contact surface width in the non-asymmetric mode (in equality of diameter of rollers, the rotational speed of the rollers and the rollers’ surface finish). The material used in this research has strai...
متن کاملApplication of harmony search algorithm to evaluate performance of diamond wire saw
Evaluation and prediction of performance of diamond wire saw is one of the most important factors involved in planning the dimension stone quarries. The wear rate of diamond wire saw can be investigated as a major criterion to evaluate its performance. The wear rate of diamond wire saw depends upon non-controlled parameters related to rock characteristics and controlled parameters related to ch...
متن کاملFixed abrasive diamond wire machining—part I: process monitoring and wire tension force
The process monitoring and mechanics of fixed abrasive diamond wire saw machining are investigated in this study. New techniques to affix diamond particles to a steel wire core have advanced to make this process feasible for the machining of ceramics, wood, and foam materials. Developments in fixed abrasive diamond wire machining are first reviewed. Advantages of using fixed abrasive diamond wi...
متن کاملWafer Slicing and Wire Saw Manufacturing Technology
Wire saw, with its ability to cut very thin wafers from large diameter crystalline ingots of semiconductor materials, has emerged as a leading technology for wafer production in semiconductor and photovoltaic industry. Nevertheless, the wire saw cutting process remains lacking a theoretical methodology and is not properly understood. The modern times compulsion of more accurate and efficient ma...
متن کاملExperimental Study on Slicing of Sapphire with Fixed Abrasive Diamond Wire Saw
Experimental study on slicing of sapphire with fixed abrasive diamond wire saw was conducted in this paper. The process parameters were optimized through orthogonal experiment of three factors and four levels. The effects of wire speed, feed speed and tension pressure on the surface roughness were analyzed. Surface roughness in cutting direction and feed direction were both detected. The result...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The International Journal of Advanced Manufacturing Technology
سال: 2022
ISSN: ['1433-3015', '0268-3768']
DOI: https://doi.org/10.1007/s00170-022-09233-w